Backport #18678
WebAuthn may cause a security exception if the provided APP_ID is not allowed for the
current origin. Therefore we should reattempt authentication without the appid
extension.
Also we should allow [u2f] as-well as [U2F] sections.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Migrate from U2F to Webauthn
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* allways set a message-id on mails
* Add unit tests for mailer & Message-ID
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Improve install code to avoid low-level mistakes.
If a user tries to do a re-install in a Gitea database, they gets a warning and double check.
When Gitea runs, it never create empty app.ini automatically.
Also some small (related) refactoring:
* Refactor db.InitEngine related logic make it more clean (especially for the install code)
* Move some i18n strings out from setting.go to make the setting.go can be easily maintained.
* Show errors in CLI code if an incorrect app.ini is used.
* APP_DATA_PATH is created when installing, and checked when starting (no empty directory is created any more).
Make relative unix sockets absolute by making them absolute against the AppWorkPath
Fix#17833
## ⚠️ BREAKING ⚠️
Prior to this PR relative unix sockets would have been asserted to be relative to the current working directory that gitea, gitea serv, hook and manager etc were running in. Hooks and Serv would have failed to work properly under this situation so we expect that although this is a technically breaking change the previous situation was already broken.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Gitea writes its own AppPath into git hook scripts. If Gitea's AppPath changes, then the git push will fail.
This PR:
* Introduce an AppState module, it can persist app states into database
* During GlobalInit, Gitea will check if the current AppPath is the same as last one. If they don't match, Gitea will sync git hooks.
* Refactor some code to make them more clear.
* Also, "Detect if gitea binary's name changed" #11341 is related, we call models.RewriteAllPublicKeys to update ssh authorized_keys file
Nodeinfo is a way to expose certain metadata about a server for use of discovery regarding functionality of its federation capabilities.
Two endpoints are required:
1. `/.well-known/nodeinfo` which informs client where it can find the location of the location of its metadata (including which version of the schema is used)
2. the endpoint which exposes the metadata in json format according to schema.
Notes:
* `openRegistrations` is a required field, but I propose to set to false as default in case someone writes a crawler to discover "open" gitea instances
* to limit data leakage I also propose to not include the `usage` field (note it is required so it should be included, but left as empty).
More info:
https://github.com/jhass/nodeinfohttps://github.com/jhass/nodeinfo/tree/main/schemas/2.1http://nodeinfo.diaspora.software/protocol.html
Add a new default theme `auto`, which will automatically switch between
`gitea` (light) and `arc-green` (dark) themes depending on the user's
operating system settings.
Closes: #8183
The io/ioutil package has been deprecated as of Go 1.16, see
https://golang.org/doc/go1.16#ioutil. This commit replaces the existing
io/ioutil functions with their new definitions in io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Rename`[repository]` `DISABLE_MIRRORS` to `[mirror]` `DISABLE_NEW_PULL` and add `ENABLED` and `DISABLE_NEW_PUSH` with the below meanings:
- `ENABLED`: **true**: Enables the mirror functionality. Set to **false** to disable all mirrors.
- `DISABLE_NEW_PULL`: **false**: Disable the creation of **new** mirrors. Pre-existing mirrors remain valid.
- `DISABLE_NEW_PUSH`: **false**: Disable the creation of **new** push mirrors. Pre-existing mirrors remain valid.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
* Add proxy settings and support for migration and webhook
* Fix default value
* Add newline for example ini
* Add lfs proxy support
* Fix lint
* Follow @zeripath's review
* Fix git clone
* Fix test
* missgin http requests for proxy
* use empty
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
One of the issues holding back performance of the API is the problem of hashing.
Whilst banning BASIC authentication with passwords will help, the API Token scheme
still requires a PBKDF2 hash - which means that heavy API use (using Tokens) can
still cause enormous numbers of hash computations.
A slight solution to this whilst we consider moving to using JWT based tokens and/or
a session orientated solution is to simply cache the successful tokens. This has some
security issues but this should be balanced by the security issues of load from
hashing.
Related #14668
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
One of the repeatedly reported issues has been that gitea produces too much console
logging during set up even if the console logger is turned off.
Fundamentally this is due to some otherwise very helpful logging that has to occur
before logging is set up. This has come to a head with the merging of #16243 where
otherwise potentially helpful Trace logging in the git module now appears on the
console.
This PR proposes three things:
1. Change the initial default logger to Info not Trace.
2. Change the logging for the AppPath things to Info in recompense.
3. Add two new command line options to gitea web: --quiet and --verbose
`gitea web -q` or `gitea web --quiet` will only log Fatal level initially.
`gitea web -verbose` will log at Trace.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Ensure settings for Service and Mailer are read on the install page
NewContext does not set the mailer or service settings so add
a new function that will run this.
Fix#15894
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Set self-adjusting deadline for connection writing
In #16055 it appears that the simple 5s deadline doesn't work for large
file writes. Now we can't - or at least shouldn't just set no deadline
as go will happily let these connections block indefinitely. However,
what seems reasonable is to set some minimum rate we expect for writing.
This PR suggests the following algorithm:
* Every write has a minimum timeout of 5s (adjustable at compile time.)
* If there has been a previous write - then consider its previous
deadline, add half of the minimum timeout + 2s per kb about to written.
* If that new deadline is after the minimum timeout use that.
Fix#16055
* Linearly increase timeout
* Make PerWriteTimeout, PerWritePerKbTimeouts configurable
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* add a new internal hook to save ssh log
as title, when a ssh error ocure like #15785.
only when switch ``RUN_MODE`` to dev can we
found which error is ocure. But this way is
not a good idea for production envirment.
this changes try save ssh error mesage to the
log file like other log by a new internal hook.
I think it's usefull for find error message
in production envirment. Thanks.
Signed-off-by: a1012112796 <1012112796@qq.com>
* rename and fix nit
* Update modules/private/hook.go
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Refactored handleOAuth2SignIn in routers/user/auth.go
The function handleOAuth2SignIn was called twice but some code path could only
be reached by one of the invocations. Moved the unnecessary code path out of
handleOAuth2SignIn.
* Refactored user creation
There was common code to create a user and display the correct error message.
And after the creation the only user should be an admin and if enabled a
confirmation email should be sent. This common code is now abstracted into
two functions and a helper function to call both.
* Added auto-register for OAuth2 users
If enabled new OAuth2 users will be registered with their OAuth2 details.
The UserID, Name and Email fields from the gothUser are used.
Therefore the OpenID Connect provider needs additional scopes to return
the coresponding claims.
* Added error for missing fields in OAuth2 response
* Linking and auto linking on oauth2 registration
* Set default username source to nickname
* Add automatic oauth2 scopes for github and google
* Add hint to change the openid connect scopes if fields are missing
* Extend info about auto linking security risk
Co-authored-by: Viktor Kuzmin <kvaster@gmail.com>
Signed-off-by: Martin Michaelis <code@mgjm.de>
* _ to unused func options
* rm useless brakets
* rm trifial non used models functions
* rm dead code
* rm dead global vars
* fix routers/api/v1/repo/issue.go
* dont overload import module
Implements request #14320 The rendering of CSV files does match the diff style.
* Moved CSV logic into base package.
* Added method to create a tabular diff.
* Added CSV compare context.
* Added CSV diff template.
* Use new table style in CSV markup.
* Added file size limit for CSV rendering.
* Display CSV parser errors in diff.
* Lazy read single file.
* Lazy read rows for full diff.
* Added unit tests for various CSV changes.
in previouse if a log subsetcion not set level
it will use ``info`` as default value.
this pr will make default value (``[log] -> LEVEL``) useable.
example config:
```INI
[log]
MODE = console
LEVEL = Trace
[log.console]
LEVEL =
STDERR = false
```
previous result:
```JSON
// console:
{
"level": "info",
...................
}
```
after change:
```JSON
// console:
{
"level": "track",
...................
}
```
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add reverse proxy configuration support for remote IP address validation
* Trust all IP addresses in containerized environments by default
* Use single option to specify networks and proxy IP addresses. By default trust all loopback IPs
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Make SSH server host key path configurable
* make it possible to have multiple keys
* Make gitea.rsa the default key
* Add some more logging
Signed-off-by: Andrew Thornton <art27@cantab.net>
MakeAbsoluteAssetURL should just url join the static url prefix on to appurl
if it is not an absolute path - this is because StaticURLPrefix is an absolute
prefix not a relative prefix to the app sub url.
Fix#14422
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Added option to disable web hooks
This mod introduces DISABLE_WEB_HOOKS parameter in [security] section
of app.ini (by default set to false). If set to true it disables web
hooks feature. Any existing undelivered web hook tasks will be cancelled.
Any existing web hook definitions will be left untouched in db but
its delivery tasks will be ignored.
Author-Change-Id: IB#1105130
* Webhook spelling fixed
Webhook spelling fixed.
Fixes: 07df6614dc84cdd2e9f39c57577fa1062bd70012
Related: https://github.com/go-gitea/gitea/pull/13176#pullrequestreview-510868421
Author-Change-Id: IB#1105174
* Parameter description fixed
Parameter description fixed.
Fixes: 07df6614dc84cdd2e9f39c57577fa1062bd70012
Related: https://github.com/go-gitea/gitea/pull/13176#pullrequestreview-514086107
Author-Change-Id: IB#1105174
* Add support for ed25519_sk and ecdsa_sk SSH keys
These start with sk-ssh-ed25519@openssh.com and sk-ecdsa-sha2-nistp256@openssh.com.
They are supported in recent versions of go x/crypto/ssh and OpenSSH 8.2
or higher.
* skip ssh-keygen
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
