Attempt clarify the AppWorkPath in the documentation by using different
notation and adding a section to the start of the cheat sheet.
Fix#21523
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Related #20471
This PR adds global quota limits for the package registry. Settings for
individual users/orgs can be added in a seperate PR using the settings
table.
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Close https://github.com/go-gitea/gitea/issues/21640
Before: Gitea can create users like ".xxx" or "x..y", which is not
ideal, it's already a consensus that dot filenames have special
meanings, and `a..b` is a confusing name when doing cross repo compare.
After: stricter
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Fix https://github.com/go-gitea/gitea/issues/21666
Caused by https://github.com/go-gitea/gitea/pull/19663
Before: when install, the INTERNAL_TOKEN was always generated and saved.
But the internal token may be already there by INTERNAL_TOKEN_URI
After: INTERNAL_TOKEN_URI file must be non-empty. When install, skip
internal token generation if the token exists.
_This is a different approach to #20267, I took the liberty of adapting
some parts, see below_
## Context
In some cases, a weebhook endpoint requires some kind of authentication.
The usual way is by sending a static `Authorization` header, with a
given token. For instance:
- Matrix expects a `Bearer <token>` (already implemented, by storing the
header cleartext in the metadata - which is buggy on retry #19872)
- TeamCity #18667
- Gitea instances #20267
- SourceHut https://man.sr.ht/graphql.md#authentication-strategies (this
is my actual personal need :)
## Proposed solution
Add a dedicated encrypt column to the webhook table (instead of storing
it as meta as proposed in #20267), so that it gets available for all
present and future hook types (especially the custom ones #19307).
This would also solve the buggy matrix retry #19872.
As a first step, I would recommend focusing on the backend logic and
improve the frontend at a later stage. For now the UI is a simple
`Authorization` field (which could be later customized with `Bearer` and
`Basic` switches):
The header name is hard-coded, since I couldn't fine any usecase
justifying otherwise.
## Questions
- What do you think of this approach? @justusbunsi @Gusted @silverwind
- ~~How are the migrations generated? Do I have to manually create a new
file, or is there a command for that?~~
- ~~I started adding it to the API: should I complete it or should I
drop it? (I don't know how much the API is actually used)~~
## Done as well:
- add a migration for the existing matrix webhooks and remove the
`Authorization` logic there
_Closes #19872_
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: delvh <dev.lh@web.de>
I found myself wondering whether a PR I scheduled for automerge was
actually merged. It was, but I didn't receive a mail notification for it
- that makes sense considering I am the doer and usually don't want to
receive such notifications. But ideally I want to receive a notification
when a PR was merged because I scheduled it for automerge.
This PR implements exactly that.
The implementation works, but I wonder if there's a way to avoid passing
the "This PR was automerged" state down so much. I tried solving this
via the database (checking if there's an automerge scheduled for this PR
when sending the notification) but that did not work reliably, probably
because sending the notification happens async and the entry might have
already been deleted. My implementation might be the most
straightforward but maybe not the most elegant.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
A patch to #17335.
Just like AppPath, Gitea writes its own CustomConf into git hook scripts
too. If Gitea's CustomConf changes, then the git push may fail.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This patch provide a mechanism to disable
[sitemap](https://github.com/go-gitea/gitea/pull/18407).
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Co-authored-by: 6543 <6543@obermui.de>
Follow-up to #21352: when testing this out, I found out that the syntax
for the `symbolic-ref` command was different than originally assumed in
that PR. Never got around to submitting a PR until now.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Our implementation of `IsZero` can't work. An "empty" timestamp (= 0)
calls `time.Unix(int64(ts), 0).IsZero()` which is always `false`. Only
`time.Time{}.IsZero()` is `true`.
We call this method ~~only at one place~~ and there the value
(`UpdatedUnix`) should be always != 0 so this PR may not have
consequences.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
I noticed an admin is not allowed to upload packages for other users
because `ctx.IsSigned` was not set.
I added a check for `user.IsActive` and `user.ProhibitLogin` too because
both was not checked. Tests enforce this now.
Co-authored-by: Lauris BH <lauris@nix.lv>
The OAuth spec [defines two types of
client](https://datatracker.ietf.org/doc/html/rfc6749#section-2.1),
confidential and public. Previously Gitea assumed all clients to be
confidential.
> OAuth defines two client types, based on their ability to authenticate
securely with the authorization server (i.e., ability to
> maintain the confidentiality of their client credentials):
>
> confidential
> Clients capable of maintaining the confidentiality of their
credentials (e.g., client implemented on a secure server with
> restricted access to the client credentials), or capable of secure
client authentication using other means.
>
> **public
> Clients incapable of maintaining the confidentiality of their
credentials (e.g., clients executing on the device used by the resource
owner, such as an installed native application or a web browser-based
application), and incapable of secure client authentication via any
other means.**
>
> The client type designation is based on the authorization server's
definition of secure authentication and its acceptable exposure levels
of client credentials. The authorization server SHOULD NOT make
assumptions about the client type.
https://datatracker.ietf.org/doc/html/rfc8252#section-8.4
> Authorization servers MUST record the client type in the client
registration details in order to identify and process requests
accordingly.
Require PKCE for public clients:
https://datatracker.ietf.org/doc/html/rfc8252#section-8.1
> Authorization servers SHOULD reject authorization requests from native
apps that don't use PKCE by returning an error message
Fixes#21299
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Previously mentioning a user would link to its profile, regardless of
whether the user existed. This change tests if the user exists and only
if it does - a link to its profile is added.
* Fixes#3444
Signed-off-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
It distractingly shows up on unit tests
* Looks like a leftover from #20571
Signed-off-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
At the moment a repository reference is needed for webhooks. With the
upcoming package PR we need to send webhooks without a repository
reference. For example a package is uploaded to an organization. In
theory this enables the usage of webhooks for future user actions.
This PR removes the repository id from `HookTask` and changes how the
hooks are processed (see `services/webhook/deliver.go`). In a follow up
PR I want to remove the usage of the `UniqueQueue´ and replace it with a
normal queue because there is no reason to be unique.
Co-authored-by: 6543 <6543@obermui.de>
A lot of our code is repeatedly testing if individual errors are
specific types of Not Exist errors. This is repetitative and unnecesary.
`Unwrap() error` provides a common way of labelling an error as a
NotExist error and we can/should use this.
This PR has chosen to use the common `io/fs` errors e.g.
`fs.ErrNotExist` for our errors. This is in some ways not completely
correct as these are not filesystem errors but it seems like a
reasonable thing to do and would allow us to simplify a lot of our code
to `errors.Is(err, fs.ErrNotExist)` instead of
`package.IsErr...NotExist(err)`
I am open to suggestions to use a different base error - perhaps
`models/db.ErrNotExist` if that would be felt to be better.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
Fixes#21379
The commits are capped by `setting.UI.FeedMaxCommitNum` so
`len(commits)` is not the correct number. So this PR adds a new
`TotalCommits` field.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This changes the rendering logic of issue titles. If a substring in an
issue title is enclosed with a pair of backticks, it'll be rendered with
a monospace font (HTML `code` tag).
* Closes#20887
Signed-off-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
After some discussion, introduce a new slice `brokenArgs` to make
`gitCmd.Run()` return errors if any dynamic argument is invalid.
Co-authored-by: delvh <dev.lh@web.de>
Due to a bug in presumably an older version of Gitea, multiple of my
repositories still have their HEADs pointing to a `master` branch while
the default branch on the UI is listed as `main`. This adds a `gitea
doctor` command that will fix all of the HEAD references for repos when
they're not synchronized with the default branch in the DB.
This will help with cloning to ensure that git automatically checks out
the right branch, instead of a nonexistent one.
Note: I'm not sure if I actually need to do more other than add a file
here. Will try testing this out on my server soon.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes#17655
If you rename `user1` to `user2` and visit `/user1` you get redirected
to `/user2`. But if you visit `/user1/repo` you just get a 404 error.
With this PR the user is redirected to `/user2/repo`.
Partially fix#21213.
This PR will get client IP address from SSH_CONNECTION env which should
be the first field of that. And deliver it to the internal API so Gitea
routers could record the real IP from SSH requests.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
We should only log CheckPath errors if they are not simply due to
context cancellation - and we should add a little more context to the
error message.
Fix#20709
Signed-off-by: Andrew Thornton <art27@cantab.net>
There are repeated issues reported whereby users are unable to interpret
the template errors. This PR adds some (somewhat complex) error handling
to the panic recovery for template renderering but hopefully makes the
interpretation of the error easier.
Reference #21344
Signed-off-by: Andrew Thornton <art27@cantab.net>
Close#20315 (fix the panic when parsing invalid input), Speed up #20231 (use ls-tree without size field)
Introduce ListEntriesRecursiveFast (ls-tree without size) and ListEntriesRecursiveWithSize (ls-tree with size)
Calls to ToCommit are very slow due to fetching diffs, analyzing files.
This patch lets us supply `stat` as false to speed fetching a commit
when we don't need the diff.
/v1/repo/commits has a default `stat` set as true now. Set to false to
experience fetching thousands of commits per second instead of 2-5 per
second.
There is a small bug in #20571 whereby `$a a$b b$` will not be correctly
detected as a math inline block of `a a$b b`. This PR fixes this.
Also reenable test cases as per #21340
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Only load SECRET_KEY and INTERNAL_TOKEN if they exist.
Never write the config file if the keys do not exist, which was only a fallback for Gitea upgraded from < 1.5
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This adds an api endpoint `/files` to PRs that allows to get a list of changed files.
built upon #18228, reviews there are included
closes https://github.com/go-gitea/gitea/issues/654
Co-authored-by: Anton Bracke <anton@ju60.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR would presumably
Fix#20522Fix#18773Fix#19069Fix#21077Fix#13622
-----
1. Check whether unit type is currently enabled
2. Check if it _will_ be enabled via opt
3. Allow modification as necessary
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
The behaviour of `PreventSurroundingPre` has changed in
https://github.com/alecthomas/chroma/pull/618 so that apparently it now
causes line wrapper tags to be no longer emitted, but we need some form
of indication to split the HTML into lines, so I did what
https://github.com/yuin/goldmark-highlighting/pull/33 did and added the
`nopWrapper`.
Maybe there are more elegant solutions but for some reason, just
splitting the HTML string on `\n` did not work.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Go creates temporary files as 600, but sometimes we want the group to be able to read them (for example,
for another user to back up the storage)
This PR applies the umask to the renamed tmp files in local storage.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Close#20098, in the NPM registry API, implemented to match what's described by https://github.com/npm/registry/blob/master/docs/REGISTRY-API.md#get-v1search
Currently have only implemented the bare minimum to work with the [Unity Package Manager](https://docs.unity3d.com/Manual/upm-ui.html).
Co-authored-by: Jack Vine <jackv@jack-lemur-suse.cat-prometheus.ts.net>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#20863
When REQUIRE_SIGNIN_VIEW = true, even with public repositories, you can only see them after you login. The packages should not be accessed without login.
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Follows #21119
The manual length check doesn't make sense nowadays:
1. The length check is already done by form's `binding:MaxSize` (then the manual check is unnecessary)
2. The CreateRepository doesn't have such check (then the manual check is inconsistent)
So this PR removes these manual length checks.
Both allow only limited characters. If you input more, you will get a error
message. So it make sense to limit the characters of the input fields.
Slightly relax the MaxSize of repo's Description and Website
Using `append(args, strings.Fields(arg)...)` is dangerous, it may
generate incorrect results.
For example: `arg1 "the dangerous"` will be splitted to 3 arguments:
`arg1`, `"the`, `dangerous"`. In some cases the incorrect arguments may
lead to security problems.
This fixes#5709 and #17316 by changing the order of listed branches
and tags to show the ones with latest commits atop.
It's achieved with changing underlying "show-ref" git command with
"for-each-ref" as suggested in https://stackoverflow.com/a/5188364
Also, it's passing format string so the output matches "show-ref"
command output.
close#5709close#17316
This PR adds mathematical rendering with KaTeX.
The first step is to add a Goldmark extension that detects the latex
(and tex) mathematics delimiters.
The second step to make this extension only run if math support is
enabled.
The second step is to then add KaTeX CSS and JS to the head which will
load after the dom is rendered.
Fix#3445
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This commit adds the possibility to click the labels in the message
"User added/removed the X label", which will lead to the issues page,
filtered by the clicked label.
This pull requests aims to fix#19768
_I've tried to follow the contribution guidelines as carefully as
possible, but in case I made a mistake: Please correct me._
<!--
Please check the following:
1. Make sure you are targeting the `main` branch, pull requests on
release branches are only allowed for bug fixes.
2. Read contributing guidelines:
https://github.com/go-gitea/gitea/blob/main/CONTRIBUTING.md
3. Describe what your pull request does and which issue you're targeting
(if any)
-->
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Remove this small, but unnecessary
[module](https://fomantic-ui.com/elements/image.html) and use `img`
selector over previous `.image`. Did a few tests, could not notice any
visual regression.
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
The `go-licenses` make task introduced in #21034 is being run on make vendor
and occasionally causes an empty go-licenses file if the vendors need to
change. This should be moved to the generate task as it is a generated file.
Now because of this change we also need to split generation into two separate
steps:
1. `generate-backend`
2. `generate-frontend`
In the future it would probably be useful to make `generate-swagger` part of `generate-frontend` but it's not tolerated with our .drone.yml
Ref #21034
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
Add support for triggering webhook notifications on wiki changes.
This PR contains frontend and backend for webhook notifications on wiki actions (create a new page, rename a page, edit a page and delete a page). The frontend got a new checkbox under the Custom Event -> Repository Events section. There is only one checkbox for create/edit/rename/delete actions, because it makes no sense to separate it and others like releases or packages follow the same schema.
The actions itself are separated, so that different notifications will be executed (with the "action" field). All the webhook receivers implement the new interface method (Wiki) and the corresponding tests.
When implementing this, I encounter a little bug on editing a wiki page. Creating and editing a wiki page is technically the same action and will be handled by the ```updateWikiPage``` function. But the function need to know if it is a new wiki page or just a change. This distinction is done by the ```action``` parameter, but this will not be sent by the frontend (on form submit). This PR will fix this by adding the ```action``` parameter with the values ```_new``` or ```_edit```, which will be used by the ```updateWikiPage``` function.
I've done integration tests with matrix and gitea (http).
Fix#16457
Signed-off-by: Aaron Fischer <mail@aaron-fischer.net>
A testing cleanup.
This pull request replaces `os.MkdirTemp` with `t.TempDir`. We can use the `T.TempDir` function from the `testing` package to create temporary directory. The directory created by `T.TempDir` is automatically removed when the test and all its subtests complete.
This saves us at least 2 lines (error check, and cleanup) on every instance, or in some cases adds cleanup that we forgot.
Reference: https://pkg.go.dev/testing#T.TempDir
```go
func TestFoo(t *testing.T) {
// before
tmpDir, err := os.MkdirTemp("", "")
require.NoError(t, err)
defer os.RemoveAll(tmpDir)
// now
tmpDir := t.TempDir()
}
```
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
When setting.Git.DisablePartialClone is set to false then the web server will add filter support to web http. It does this by using`-c` command arguments but this will not work on gitea serv as the upload-pack and receive-pack commands do not support this.
Instead we move these options into the .gitconfig instead.
Fix#20400
Signed-off-by: Andrew Thornton <art27@cantab.net>
When migrating add several more important sanity checks:
* SHAs must be SHAs
* Refs must be valid Refs
* URLs must be reasonable
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <matti@mdranta.net>
* feat: extend issue template for yaml
* feat: support yaml template
* feat: render form to markdown
* feat: support yaml template for pr
* chore: rename to Fields
* feat: template unmarshal
* feat: split template
* feat: render to markdown
* feat: use full name as template file name
* chore: remove useless file
* feat: use dropdown of fomantic ui
* feat: update input style
* docs: more comments
* fix: render text without render
* chore: fix lint error
* fix: support use description as about in markdown
* fix: add field class in form
* chore: generate swagger
* feat: validate template
* feat: support is_nummber and regex
* test: fix broken unit tests
* fix: ignore empty body of md template
* fix: make multiple easymde editors work in one page
* feat: better UI
* fix: js error in pr form
* chore: generate swagger
* feat: support regex validation
* chore: generate swagger
* fix: refresh each markdown editor
* chore: give up required validation
* fix: correct issue template candidates
* fix: correct checkboxes style
* chore: ignore .hugo_build.lock in docs
* docs: separate out a new doc for merge templates
* docs: introduce syntax of yaml template
* feat: show a alert for invalid templates
* test: add case for a valid template
* fix: correct attributes of required checkbox
* fix: add class not-under-easymde for dropzone
* fix: use more back-quotes
* chore: remove translation in zh-CN
* fix EasyMDE statusbar margin
* fix: remove repeated blocks
* fix: reuse regex for quotes
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The recovery, API, Web and package frameworks all create their own HTML
Renderers. This increases the memory requirements of Gitea
unnecessarily with duplicate templates being kept in memory.
Further the reloading framework in dev mode for these involves locking
and recompiling all of the templates on each load. This will potentially
hide concurrency issues and it is inefficient.
This PR stores the templates renderer in the context and stores this
context in the NormalRoutes, it then creates a fsnotify.Watcher
framework to watch files.
The watching framework is then extended to the mailer templates which
were previously not being reloaded in dev.
Then the locales are simplified to a similar structure.
Fix#20210Fix#20211Fix#20217
Signed-off-by: Andrew Thornton <art27@cantab.net>
Adds a new option to only show relevant repo's on the explore page, for bigger Gitea instances like Codeberg this is a nice option to enable to make the explore page more populated with unique and "high" quality repo's. A note is shown that the results are filtered and have the possibility to see the unfiltered results.
Co-authored-by: vednoc <vednoc@protonmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
* Set no-tags in git fetch on compare
In the compare endpoint the git fetch is restricted to a certain branch however,
this does not completely prevent tag acquisition/pollution as git fetch will collect
any tags on that branch.
This causes pollution of the tag namespace and could cause confusion by users.
This PR adds `--no-tags` to the `git fetch` call.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update modules/git/repo_compare.go
* Update modules/git/repo_compare.go
Signed-off-by: Andrew Thornton <art27@cantab.net>
This should solve the main problem of dynamic assets getting stale after
a version upgrade. Everything not affected will use query-string based
cache busting, which includes files loaded via HTML or worker scripts.
This PR adds functionality to allow Gitea to sit behind an
HAProxy and HAProxy protocolled connections directly.
Fix#7508
Signed-off-by: Andrew Thornton <art27@cantab.net>
The graceful manager waits for 4 listeners to be created or to be told that they are not needed. If it is not told about them it will indefinitely and timeout.
This leads to SVC hosts not being told of being in the readyState but on Unix would lead to the termination of the process.
There was an unfortunate regression in #20299 which missed this subtly and in the case whereby SSH is disabled the `builtinUnused()` is not called.
This PR adds a call to `builtinUnused()` when not using the builtin ssh to allow `createServerWaitGroup.Done()` to be called.
In addition it was noted that the if/else clauses for timeout informing of the SVC host were in the wrong order. These have been swapped.
Fix#20609
* Disable doctor logging on panic
If permissions are incorrect for writing to the doctor log simply disable the log file
instead of panicing.
Related #20570
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update cmd/doctor.go
* Update cmd/doctor.go
Co-authored-by: delvh <dev.lh@web.de>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This adds support for getting the user's full name from the reverse
proxy in addition to username and email.
Tested locally with caddy serving as reverse proxy with Tailscale
authentication.
Signed-off-by: Will Norris <will@tailscale.com>
Signed-off-by: Will Norris <will@tailscale.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The use of `--follow` makes getting these commits very slow on large repositories
as it results in searching the whole commit tree for a blob.
Now as nice as the results of `--follow` are, I am uncertain whether it is really
of sufficient importance to keep around.
Fix#20764
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
By default Gitea will always unlink any sockets that are provided using the `LISTEN_FDS` environment variable. This is because it uses this variable to handle passing when it is doing a graceful restart. However, this same mechanism is used by systemd - which explicitly expects that passed in sockets should not be unlinked by the receiving process.
This PR adjusts Gitea's graceful restart mechanism to use an additional environment variable which tracks if a listening socket was opened by Gitea - and therefore should be unlinked on shutdown by Gitea.
Fix#20490
Co-authored-by: zeripath <art27@cantab.net>
This PR rewrites the invisible unicode detection algorithm to more
closely match that of the Monaco editor on the system. It provides a
technique for detecting ambiguous characters and relaxes the detection
of combining marks.
Control characters are in addition detected as invisible in this
implementation whereas they are not on monaco but this is related to
font issues.
Close#19913
Signed-off-by: Andrew Thornton <art27@cantab.net>
This operation that shifts the content from title to data-content is
useless when we can directly render the expected HTML instead.
This change does prevent these tooltips from working when the user has
JS disabled in their browser, but I think we made it clear by now that
JS is required for gitea to work properly.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* merge `CheckLFSVersion` into `InitFull` (renamed from `InitWithSyncOnce`)
* remove the `Once` during git init, no data-race now
* for doctor sub-commands, `InitFull` should only be called in initialization stage
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Added support for Pub packages.
* Update docs/content/doc/packages/overview.en-us.md
Co-authored-by: Gergely Nagy <algernon@users.noreply.github.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Gergely Nagy <algernon@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
This enables git.Command's Run to optionally use the given context directly so its deadline will be respected. Otherwise, it falls back to the previous behavior of using the supplied timeout or a default timeout value of 360 seconds.
repo's serviceRPC() calls now use the context's deadline (which is unset/unlimited) instead of the default 6-minute timeout. This means that large repo clones will no longer arbitrarily time out on the upload-pack step, and pushes can take longer than 6 minutes on the receive-pack step.
Fixes#20680
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* increase default page sizes to 20
* adjust docs to reflect that the setting is used all over the place
* fix tests
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Executable check always returns true for windows
Windows doesn't have the concept of "executable" POSIX bits so for now always return true to minimise doctor and logging noise. Addresses #20636
* gofmt tweak
* Update modules/repository/hooks.go
Co-authored-by: silverwind <me@silverwind.io>
* gofmt comment line
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
- Git only decides to use the Wire 2 protocol when `git
{receive,upload}-pack` receive the `GIT_PROTOCOL` environment with as
value `version=2`. Currently the internal SSH Server wasn't passing this
environment through. The `gitea serv` code already passed all received
environments to the git command, so no code changes there.
* `PROTOCOL`: can be smtp, smtps, smtp+startls, smtp+unix, sendmail, dummy
* `SMTP_ADDR`: domain for SMTP, or path to unix socket
* `SMTP_PORT`: port for SMTP; defaults to 25 for `smtp`, 465 for `smtps`, and 587 for `smtp+startls`
* `ENABLE_HELO`, `HELO_HOSTNAME`: reverse `DISABLE_HELO` to `ENABLE_HELO`; default to false + system hostname
* `FORCE_TRUST_SERVER_CERT`: replace the unclear `SKIP_VERIFY`
* `CLIENT_CERT_FILE`, `CLIENT_KEY_FILE`, `USE_CLIENT_CERT`: clarify client certificates here
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Support localized README
* Slightly simplify getting the readme file and add some tests. Ensure that i18n also
works for docs/ etc.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update modules/markup/renderer.go
* Update modules/markup/renderer.go
* Update modules/markup/renderer.go
Co-authored-by: Andrew Thornton <art27@cantab.net>
- Add a new push mirror to specific repository
- Sync now ( send all the changes to the configured push mirrors )
- Get list of all push mirrors of a repository
- Get a push mirror by ID
- Delete push mirror by ID
Signed-off-by: Mohamed Sekour <mohamed.sekour@exfo.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
* Add latest commit's SHA to content response
- When requesting the contents of a filepath, add the latest commit's
SHA to the requested file.
- Resolves#12840
* Add swagger
* Fix NPE
* Fix tests
* Hook into LastCommitCache
* Move AddLastCommitCache to a common nogogit and gogit file
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Prevent NPE
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Always respect the user's configured mime type map
- Allow more types like image/pdf/video/audio to serve with correct content-type
- Shorten cache duration of raw files to 5 minutes, matching GitHub
- Don't set `content-disposition: attachment`, let the browser decide whether it wants to download or display a file directly
- Implement rfc5987 for filenames, remove previous hack. Confirmed it working in Safari.
- Make PDF attachment work in Safari by removing `sandbox` attribute.
This change will make a lot more file types open directly in browser now. Logic should generally be more readable than before with less `if` nesting and such.
Replaces: https://github.com/go-gitea/gitea/pull/20460
Replaces: https://github.com/go-gitea/gitea/pull/20455
Fixes: https://github.com/go-gitea/gitea/issues/20404
The code in modules/ssh/ssh.go:sessionHandler() currently cause an error to be
logged if `gitea serv` exits with a exit(1). This logging is useless because the
accompanying stderr is not provided and in any case the exit(1) is most likely due
to permissions errors.
Further it then causes the EOF to be logged - even though this is not helpful.
This PR simply checks the errors returned and stops logging them.
In the case of misconfigurations causing `gitea serv` to fail with exit(1)
the current logging is not helpful at determining this and users should simply
review the message passed over the ssh connection.
Fix#20473
Signed-off-by: Andrew Thornton <art27@cantab.net>
Sometimes users want to receive email notifications of messages they create or reply to,
Added an option to personal preferences to allow users to choose
Closes#20149
The LastCommitCache code is a little complex and there is unnecessary
duplication between the gogit and nogogit variants.
This PR adds the LastCommitCache as a field to the git.Repository and
pre-creates it in the ReferencesGit helpers etc. There has been some
simplification and unification of the variant code.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Use Unicode placeholders to replace HTML tags and HTML entities first, then do diff, then recover the HTML tags and HTML entities. Now the code diff with highlight has stable behavior, and won't emit broken tags.
`no-transform` allegedly disables CloudFlare auto-minify and we did not
set caching headers on html or api requests, which seems good to have
regardless.
Transformation is still allowed for asset requests.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Andrew Thornton <art27@cantab.net>
A lot of existing packages do not conform to SemVer, yet, they should be allowed
in the Conan package registry as-is. To achieve this, remove the SemVer check
from `NewRecipeReference`, and replace it with a simple empty string check.
A unit test with a non-semver version is also included.
Fixes#20405.
Signed-off-by: Gergely Nagy <me@gergo.csillger.hu>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Use body text color in for links in the repository files table
Issue/PR links (`.ref-issue`) will not be affected, as seen in other git services.
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Examining Organization membership should not necessarily require sign-in if the organization is public and the members are public. Therefore we should adjust `/org/{org}/members` to not require login.
Fix#7501
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: zeripath <art27@cantab.net>
When viewing a subdirectory and the latest commit to that directory in
the table, the commit status icon incorrectly showed the status of the
HEAD commit instead of the latest for that directory.
`login_name` (Authentication Sign-in Name) is not included in the response of `adminUserCreate` API.
This PR is to return user-specified `login_name` if there is one.
`PATCH /repos/{owner}/{repo}` API allows users to update `allow_rebase_update`, `default_delete_branch_after_merge`, but `GET /repos/{owner}/{repo}` API does not return these two options, and API users has no other ways to find the state of these two options.
This PR add `allow_rebase_update`, `default_delete_branch_after_merge` to repository query api response.
* Prevent context deadline error propagation in GetCommitsInfo
Although `WalkGitLog` tries to test for `context.DeadlineExceededErr`
there is a small chance that the error will propagate to the reader
before it is recognised. This will cause the error to propagate up to
`renderDirectoryFiles` and cause a http status 500.
Here we check that the error passed is a `DeadlineExceededErr` via error.Is
Fix#20329
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use default values when provided values are empty
- When provided values are empty like `:3000` would imply that host is
empty, use the default value.
- Resolves#20316
* Update database.go
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Currently the avatar in the navbar is being vertically aligned to the
top, this caused that the icon besides it isn't being at the middle of
the avatar. Use the `vm` helper class to force the `vertical-align` to
be `middle`.
- Resolves#20292
Creating the directory automatically is not correct.
In other places for ssh key writing (RewriteAllPrincipalKeys / appendAuthorizedKeysToFile, etc), the directory will still be created when updating the keys.
This PR will resolve the confusing and annoying problem: the dummy and empty ".ssh" directory in new git home.
Support synchronizing with the push mirrors whenever new commits are pushed or synced from pull mirror.
Related Issues: #18220
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Add git.HOME_PATH
* add legacy file check
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* pass env GNUPGHOME to git command, move the existing .gitconfig to new home, make the fix for 1.17rc more clear.
* set git.HOME_PATH for docker images to default HOME
* Revert "set git.HOME_PATH for docker images to default HOME"
This reverts commit f120101ddc267cef74e4f4b92c783d5fc8e275a1.
* force Gitea to use a stable GNUPGHOME directory
* extra check to ensure only process dir or symlink for legacy files
* refactor variable name
* The legacy dir check (for 1.17-rc1) could be removed with 1.18 release, since users should have upgraded from 1.17-rc to 1.17-stable
* Update modules/git/git.go
Co-authored-by: Steven Kriegler <61625851+justusbunsi@users.noreply.github.com>
* remove initFixGitHome117rc
* Update git.go
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Steven Kriegler <61625851+justusbunsi@users.noreply.github.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
- This code is only valid when `refNumeric` exist(otherwise we didn't find
such numeric PR and can skip that check) and give a free-pas to the "BEFORE" check when
`ref` is nil.
- Resolves#20109
Unfortunately it appears that 2048 bit RSA keys can occasionally be created in such
a way that they appear to have 2047 bit length. This PR simply changes our defaults to
allow these.
Fix#20249
Signed-off-by: Andrew Thornton <art27@cantab.net>
The recent changes to add live-reloading to the i18n translation files made the i18n code totally non-concurrent when using dev. This will make discovering other concurrency related issues far more difficult. This PR fixes these, adds some more comments to the code and slightly restructures a few functions.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add username check to doctor
- Add a new breaking change detector to Gitea's doctor, which checks if
all users still have a valid username according to Gitea. Given from
time-to-time we need to make changes, either due to new routes or due to
security, it's for a instance's admin to check if all users still have a
valid username.
* Fix extra argument
* Apply suggestions from code review
Co-authored-by: Jimmy Praet <jimmy.praet@telenet.be>
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Jimmy Praet <jimmy.praet@telenet.be>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: delvh <dev.lh@web.de>
* Refactor `i18n` to `locale`
- Currently we're using the `i18n` variable naming for the `locale`
struct. This contains locale's specific information and cannot be used
for general i18n purpose, therefore refactoring it to `locale` makes
more sense.
- Ref: https://github.com/go-gitea/gitea/pull/20096#discussion_r906699200
* Update routers/install/install.go
- Completely remove U2F support from 1.18.0, 1.17.0 will be the last
release that U2F is somewhat supported. Users who used U2F would already
be warned about using U2F for a while now and should hopefully already
be migrated. But starting 1.18 definitely remove it.
* Prototyping
* Start work on creating offsets
* Modify tests
* Start prototyping with actual MPH
* Twiddle around
* Twiddle around comments
* Convert templates
* Fix external languages
* Fix latest translation
* Fix some test
* Tidy up code
* Use simple map
* go mod tidy
* Move back to data structure
- Uses less memory by creating for each language a map.
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
* Add some comments
* Fix tests
* Try to fix tests
* Use en-US as defacto fallback
* Use correct slices
* refactor (#4)
* Remove TryTr, add log for missing translation key
* Refactor i18n
- Separate dev and production locale stores.
- Allow for live-reloading in dev mode.
Co-authored-by: zeripath <art27@cantab.net>
* Fix live-reloading & check for errors
* Make linter happy
* live-reload with periodic check (#5)
* Fix tests
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
This PR adds a doctor command to write the commit-graphs for the repositories:
`gitea doctor --run check-commit-graphs --fix`
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR adds a new manager command to switch on SQL logging and to turn it off.
```
gitea manager logging log-sql
gitea manager logging log-sql --off
```
Signed-off-by: Andrew Thornton <art27@cantab.net>
If the user-agent starts with git and user must change password but
hasn't return a 401 with the message.
It must be a 401, git doesn't seem to show the contents of the error message
when we return a 403
Fixes#19090
* go.mod: add go-fed/{httpsig,activity/pub,activity/streams} dependency
go get github.com/go-fed/activity/streams@master
go get github.com/go-fed/activity/pub@master
go get github.com/go-fed/httpsig@master
* activitypub: implement /api/v1/activitypub/user/{username} (#14186)
Return informations regarding a Person (as defined in ActivityStreams
https://www.w3.org/TR/activitystreams-vocabulary/#dfn-person).
Refs: https://github.com/go-gitea/gitea/issues/14186
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: add the public key to Person (#14186)
Refs: https://github.com/go-gitea/gitea/issues/14186
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: go-fed conformant Clock instance
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: signing http client
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: implement the ReqSignature middleware
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: hack_16834
Signed-off-by: Loïc Dachary <loic@dachary.org>
* Fix CI checks-backend errors with go mod tidy
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Change 2021 to 2022, properly format package imports
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Run make fmt and make generate-swagger
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Use Gitea JSON library, add assert for pkp
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Run make fmt again, fix err var redeclaration
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Remove LogSQL from ActivityPub person test
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Assert if json.Unmarshal succeeds
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Cleanup, handle invalid usernames for ActivityPub person GET request
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Rename hack_16834 to user_settings
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Use the httplib module instead of http for GET requests
* Clean up whitespace with make fmt
* Use time.RFC1123 and make the http.Client proxy-aware
* Check if digest algo is supported in setting module
* Clean up some variable declarations
* Remove unneeded copy
* Use system timezone instead of setting.DefaultUILocation
* Use named constant for httpsigExpirationTime
* Make pubKey IRI #main-key instead of /#main-key
* Move /#main-key to #main-key in tests
* Implemented Webfinger endpoint.
* Add visible check.
* Add user profile as alias.
* Add actor IRI and remote interaction URL to WebFinger response
* fmt
* Fix lint errors
* Use go-ap instead of go-fed
* Run go mod tidy to fix missing modules in go.mod and go.sum
* make fmt
* Convert remaining code to go-ap
* Clean up go.sum
* Fix JSON unmarshall error
* Fix CI errors by adding @context to Person() and making sure types match
* Correctly decode JSON in api_activitypub_person_test.go
* Force CI rerun
* Fix TestActivityPubPersonInbox segfault
* Fix lint error
* Use @mariusor's suggestions for idiomatic go-ap usage
* Correctly add inbox/outbox IRIs to person
* Code cleanup
* Remove another LogSQL from ActivityPub person test
* Move httpsig algos slice to an init() function
* Add actor IRI and remote interaction URL to WebFinger response
* Update TestWebFinger to check for ActivityPub IRI in aliases
* make fmt
* Force CI rerun
* WebFinger: Add CORS header and fix Href -> Template for remote interactions
The CORS header is needed due to https://datatracker.ietf.org/doc/html/rfc7033#section-5 and fixes some Peertube <-> Gitea federation issues
* make lint-backend
* Make sure Person endpoint has Content-Type application/activity+json and includes PreferredUsername, URL, and Icon
Setting the correct Content-Type is essential for federating with Mastodon
* Use UTC instead of GMT
* Rename pkey to pubKey
* Make sure HTTP request Date in GMT
* make fmt
* dont drop err
* Make sure API responses always refer to username in original case
Copied from what I wrote on #19133 discussion: Handling username case is a very tricky issue and I've already encountered a Mastodon <-> Gitea federation bug due to Gitea considering Ta180m and ta180m to be the same user while Mastodon thinks they are two different users. I think the best way forward is for Gitea to only use the original case version of the username for federation so other AP software don't get confused.
* Move httpsig algs constant slice to modules/setting/federation.go
* Add new federation settings to app.example.ini and config-cheat-sheet
* Return if marshalling error
* Make sure Person IRIs are generated correctly
This commit ensures that if the setting.AppURL is something like "http://127.0.0.1:42567" (like in the integration tests), a trailing slash will be added after that URL.
* If httpsig verification fails, fix Host header and try again
This fixes a very rare bug when Gitea and another AP server (confirmed to happen with Mastodon) are running on the same machine, Gitea fails to verify incoming HTTP signatures. This is because the other AP server creates the sig with the public Gitea domain as the Host. However, when Gitea receives the request, the Host header is instead localhost, so the signature verification fails. Manually changing the host header to the correct value and trying the veification again fixes the bug.
* Revert "If httpsig verification fails, fix Host header and try again"
This reverts commit f53e46c721a037c55facb9200106a6b491bf834c.
The bug was actually caused by nginx messing up the Host header when reverse-proxying since I didn't have the line `proxy_set_header Host $host;` in my nginx config for Gitea.
* Go back to using ap.IRI to generate inbox and outbox IRIs
* use const for key values
* Update routers/web/webfinger.go
* Use ctx.JSON in Person response to make code cleaner
* Revert "Use ctx.JSON in Person response to make code cleaner"
This doesn't work because the ctx.JSON() function already sends the response out and it's too late to edit the headers.
This reverts commit 95aad988975be3393c76094864ed6ba962157e0c.
* Use activitypub.ActivityStreamsContentType for Person response Content Type
* Limit maximum ActivityPub request and response sizes to a configurable setting
* Move setting key constants to models/user/setting_keys.go
* Fix failing ActivityPubPerson integration test by checking the correct field for username
* Add a warning about changing settings that can break federation
* Add better comments
* Don't multiply Federation.MaxSize by 1<<20 twice
* Add more better comments
* Fix failing ActivityPubMissingPerson test
We now use ctx.ContextUser so the message printed out when a user does not exist is slightly different
* make generate-swagger
For some reason I didn't realize that /templates/swagger/v1_json.tmpl was machine-generated by make generate-swagger... I've been editing it by hand for three months! 🤦
* Move getting the RFC 2616 time to a separate function
* More code cleanup
* Update go-ap to fix empty liked collection and removed unneeded HTTP headers
* go mod tidy
* Add ed25519 to httpsig algorithms
* Use go-ap/jsonld to add @context and marshal JSON
* Change Gitea user agent from the default to Gitea/Version
* Use ctx.ServerError and remove all remote interaction code from webfinger.go
It appears possible that stopwatches can become orphaned or have been orphaned in
the past.
This PR adds Orphan checks for Stopwatches.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Empty log queue on flush and close
It is possible for log events to remain in the buffer off the multichannelledlog
and thus not be logged despite close or flush.
This PR simply adds a function to empty the queue before closing or flushing.
(Except when the logger is paused.)
Reference #19982
Signed-off-by: Andrew Thornton <art27@cantab.net>
* and do similar for ChannelledLog
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
If there are dangling stopwatches with missing issues there will be repeated
logging of Unable to APIFormat stopwatches. These are unhelpful and instead
we should only log if the error is not an issue not exist error.
And we should also prevent an error on missing issue in GetActiveStopwatch too
Signed-off-by: Andrew Thornton <art27@cantab.net>
Add fetch.writeCommitGraph to gitconfig to ensure that a commit-graph will be written
on git fetch calls.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Allow git push to work when networked file systems with mixed
ownership are used with Gitea docker images >= 1.16.6 or Gitea
binaries running alongside git versions published after 04/2022.
There are circumstances independent of Gitea (networked file systems
with various permission systems) by which the git repositories managed
by Gitea may have mixed owners. It is not a behavior that Gitea have
control over nor is it a problem as long as the permissions for Gitea to
operate are correct. Gitea instances have been operating under these
conditions for a number of years.
It is detected as a potential security risk ( see
GHSA-vw2c-22j4-2fh2
) by the most recent git versions. However, Gitea always runs git
commands with a current directory matching the repository on
which it operates. That makes Gitea immune from this security problem
and it is safe to ignore the mixed owner permission check.
This gitconfig modification is done on a file dedicated to the user
exclusively used by Gitea.
Fixes: #19455
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
* clean git support for ver < 2.0
* fine tune tests for markup (which requires git module)
* remove unnecessary comments
* try to fix tests
* try test again
* use const for GitVersionRequired instead of var
* try to fix integration test
* Refactor CheckAttributeReader to make a *git.Repository version
* update document for commit signing with Gitea's internal gitconfig
* update document for commit signing with Gitea's internal gitconfig
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Allow render HTML with css/js external links
* Fix bug because of filename escape chars
* Fix lint
* Update docs about new configuration item
* Fix bug of render HTML in sub directory
* Add CSP head for displaying iframe in rendering file
* Fix test
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
* Some improvements
* some improvement
* revert change in SanitizerDisabled of external renderer
* Add sandbox for iframe and support allow-scripts and allow-same-origin
* refactor
* fix
* fix lint
* fine tune
* use single option RENDER_CONTENT_MODE, use sandbox=allow-scripts
* fine tune CSP
* Apply suggestions from code review
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Move access and repo permission to models/perm/access
* fix test
* fix git test
* Move functions sequence
* Some improvements per @KN4CK3R and @delvh
* Move issues related code to models/issues
* Move some issues related sub package
* Merge
* Fix test
* Fix test
* Fix test
* Fix test
* Rename some files
* Move access and repo permission to models/perm/access
* fix test
* Move some git related files into sub package models/git
* Fix build
* fix git test
* move lfs to sub package
* move more git related functions to models/git
* Move functions sequence
* Some improvements per @KN4CK3R and @delvh
* Prettify number of issues
- Use the PrettyNumber function to add commas in large amount of issues.
* Use client-side formatting
* prettify on both server and client
* remove unused i18n entries
* handle more cases, support other int types in PrettyNumber
* specify locale to avoid issues with node default locale
* remove superfluos argument
* introduce template helper, octicon tweaks, js refactor
* Update modules/templates/helper.go
* Apply some suggestions.
* Add comment
* Update templates/user/dashboard/issues.tmpl
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Fix copy/paste of empty newlines again
Fixes: https://github.com/go-gitea/gitea/issues/19331
Regressed by: https://github.com/go-gitea/gitea/pull/18270
Needed to do another newline addition to the Chroma output HTML to get
copy/paste work again. The previous replacement conditions are probably
obsolete, but as I'm not 100% sure, I opted to keep them.
Specifically, the Chroma HTML change mentioned in
https://github.com/go-gitea/gitea/pull/18270#issuecomment-1013350246
broke our previous newline replacement for such empty lines.
Also included are a few changes to make the test more pleasant to work
with.
* run go mod tidy
* add util.Dedent
* copy in the code
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
A pr.Reviewer may be nil when migrating from Gitea if this is a team
request review.
We do not migrate teams therefore we cannot map these requests, but we can
migrate user requests.
Signed-off-by: Andrew Thornton <art27@cantab.net>
