This reverts commit 24cf06592e.
(cherry picked from commit bf8853299d124e702ed4aa4908cc284c1c4887e8)
(cherry picked from commit cd1b258e3e5f3fae66afaa1cb8d577dc37462b9b)
Backport #25648
Replace #25580Fix#19453
The problem was: when users set "GITEA__XXX__YYY" , the "install page"
doesn't respect it.
So, to make the result consistent and avoid surprising end users, now
the "install page" also writes the environment variables to the config
file.
And, to make things clear, there are enough messages on the UI to tell
users what will happen.
There are some necessary/related changes to `environment-to-ini.go`:
* The "--clear" flag is removed and it was incorrectly written there.
The "clear" operation should be done if INSTALL_LOCK=true
* The "--prefix" flag is removed because it's never used, never
documented and it only causes inconsistent behavior.
The only conflict during backport is "ui divider" in
templates/install.tmpl
Backport #25581 by @wolfogre
Resolve#24789
## ⚠️ BREAKING ⚠️
Before this, `DEFAULT_ACTIONS_URL` cound be set to any custom URLs like
`https://gitea.com` or `http://your-git-server,https://gitea.com`, and
the default value was `https://gitea.com`.
But now, `DEFAULT_ACTIONS_URL` supports only
`github`(`https://github.com`) or `self`(the root url of current Gitea
instance), and the default value is `github`.
If it has configured with a URL, an error log will be displayed and it
will fallback to `github`.
Actually, what we really want to do is always make it
`https://github.com`, however, this may not be acceptable for some
instances of internal use, so there's extra support for `self`, but no
more, even `https://gitea.com`.
Please note that `uses: https://xxx/yyy/zzz` always works and it does
exactly what it is supposed to do.
Although it's breaking, I belive it should be backported to `v1.20` due
to some security issues.
Follow-up on the runner side:
- https://gitea.com/gitea/act_runner/pulls/262
- https://gitea.com/gitea/act/pulls/70
Co-authored-by: Jason Song <i@wolfogre.com>
Backport #25537
More fix for #24981
* #24981Close#22361, #25552
* #22361
* #25552
There were many patches for Gitea's sub-commands to satisfy the facts:
* Some sub-commands shouldn't output any log, otherwise the git protocol
would be broken
* Sometimes the users want to see "verbose" or "quiet" outputs
That's a longstanding problem, and very fragile. This PR is only a quick
patch for the problem.
In the future, the sub-command system should be refactored to a clear
solution.
----
Other changes:
* Use `ReplaceAllWriters` to replace
`RemoveAllWriters().AddWriters(writer)`, then it's an atomic operation.
* Remove unnecessary `syncLevelInternal` calls, because
`AddWriters/addWritersInternal` already calls it.
Backport #25480 by @wxiaoguang
Fix#25481
The `InitWorkPathAndCommonConfig` calls `LoadCommonSettings` which does
many checks like "current user is root or not".
Some commands like "environment-to-ini" shouldn't do such check, because
it might be run with "root" user at the moment (eg: the docker's setup
script)
ps: in the future, the docker's setup script should be improved to avoid
Gitea's command running with "root"
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #25330
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
Backport #25395 by @wxiaoguang
That's a longstanding INI package problem: the "MustXxx" calls change
the option values, and the following "Save" will save a lot of garbage
options into the user's config file.
Ideally we should refactor the INI package to a clear solution, but it's
a huge work.
A clear workaround is what this PR does: when "Save", load a clear INI
instance and save it.
Partially fix#25377, the "install" page needs more fine tunes.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #23911 by @lunny
Follow up #22405Fix#20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The INI package has many bugs and quirks, and in fact it is
unmaintained.
This PR is the first step for the INI package refactoring:
* Use Gitea's "config_provider" to provide INI access
* Deprecate the INI package by golangci.yml rule
It's been disabled by default since 1.17
(https://github.com/go-gitea/gitea/pull/18914), and it never really
delivered any benefit except being another cache layer that has its own
unsolved invalidation issues. HTTP cache works, we don't need two cache
layers at the browser for assets.
## ⚠️ BREAKING
You can remove the config `[ui].USE_SERVICE_WORKER` from your `app.ini`
now.
As discussed in
https://github.com/go-gitea/gitea/pull/24953#issuecomment-1565630156.
## ⚠️ BREAKING ⚠️
1. The `ui.THEME_COLOR_META_TAG` setting has been removed. If you still
need to set the `theme-color` meta tag, add it via
`$GITEA_CUSTOM/templates/custom/header.tmpl` instead.
2. The non-standard `default-theme` meta-tag added in
https://github.com/go-gitea/gitea/pull/13809 has been removed. Third
party code that needs to obtain the currently loaded theme should use
the `theme-<name>` class on the `<html>` node instead, which reflect the
currently active theme.
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves#2175.
## Screenshots
![grafik](https://user-images.githubusercontent.com/15185051/235123207-0aa39869-bb48-45c3-abe2-ba1e836046ec.png)
![grafik](https://user-images.githubusercontent.com/15185051/235123297-152a16ea-a857-451d-9a42-61f2cd54dd75.png)
![grafik](https://user-images.githubusercontent.com/15185051/235640782-cbfe25ec-6254-479a-a3de-133e585d7a2d.png)
The Design was mostly copied from the Projects Board.
## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.
## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration
**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
1. non-dev mode is treated as prod mode, to protect users from
accidentally running in dev mode if there is a typo in this value.
2. in dev mode, do not need to really exit if there are template errors,
because the template errors could be fixed by developer soon and the
templates get reloaded, help:
* https://github.com/go-gitea/gitea/issues/24845#issuecomment-1557615382
3. Fine tune the mail template loading message.
Replace #19857Close#19856Close#10311Close#10123
Major changes:
1. Move a lot of code from `environment-to-ini.go` to `config_env.go` to
make them testable.
2. Add `__FILE` support
3. Update documents
4. Add tests
Close#13454 , Close#23255, Close#14697 (and maybe more related
issues)
Many users have the requirement to customize the git config. This PR
introduces an easy way: put the options in Gitea's app.ini
`[git.config]`, then the config options will be applied to git config.
And it can support more flexible default config values, eg: now
`diff.algorithm=histogram` by default. According to:
https://stackoverflow.com/a/32367597/4754037 , `histogram diff` is
efficient and doesn't like to cause server-side problems.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Giteabot <teabot@gitea.io>
Replace #20257 (which is stale and incomplete)
Close#20255
Major changes:
* Deprecate the "WHITELIST", use "ALLOWLIST"
* Add wildcard support for EMAIL_DOMAIN_ALLOWLIST/EMAIL_DOMAIN_BLOCKLIST
* Update example config file and document
* Improve tests
## ⚠️ Breaking
The `log.<mode>.<logger>` style config has been dropped. If you used it,
please check the new config manual & app.example.ini to make your
instance output logs as expected.
Although many legacy options still work, it's encouraged to upgrade to
the new options.
The SMTP logger is deleted because SMTP is not suitable to collect logs.
If you have manually configured Gitea log options, please confirm the
logger system works as expected after upgrading.
## Description
Close#12082 and maybe more log-related issues, resolve some related
FIXMEs in old code (which seems unfixable before)
Just like rewriting queue #24505 : make code maintainable, clear legacy
bugs, and add the ability to support more writers (eg: JSON, structured
log)
There is a new document (with examples): `logging-config.en-us.md`
This PR is safer than the queue rewriting, because it's just for
logging, it won't break other logic.
## The old problems
The logging system is quite old and difficult to maintain:
* Unclear concepts: Logger, NamedLogger, MultiChannelledLogger,
SubLogger, EventLogger, WriterLogger etc
* Some code is diffuclt to konw whether it is right:
`log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs
`log.DelLogger("console")`
* The old system heavily depends on ini config system, it's difficult to
create new logger for different purpose, and it's very fragile.
* The "color" trick is difficult to use and read, many colors are
unnecessary, and in the future structured log could help
* It's difficult to add other log formats, eg: JSON format
* The log outputer doesn't have full control of its goroutine, it's
difficult to make outputer have advanced behaviors
* The logs could be lost in some cases: eg: no Fatal error when using
CLI.
* Config options are passed by JSON, which is quite fragile.
* INI package makes the KEY in `[log]` section visible in `[log.sub1]`
and `[log.sub1.subA]`, this behavior is quite fragile and would cause
more unclear problems, and there is no strong requirement to support
`log.<mode>.<logger>` syntax.
## The new design
See `logger.go` for documents.
## Screenshot
<details>
![image](https://github.com/go-gitea/gitea/assets/2114189/4462d713-ba39-41f5-bb08-de912e67e1ff)
![image](https://github.com/go-gitea/gitea/assets/2114189/b188035e-f691-428b-8b2d-ff7b2199b2f9)
![image](https://github.com/go-gitea/gitea/assets/2114189/132e9745-1c3b-4e00-9e0d-15eaea495dee)
</details>
## TODO
* [x] add some new tests
* [x] fix some tests
* [x] test some sub-commands (manually ....)
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
Regression of #24536. If the user doesn't explicitly disable Actions, it
will be enabled.
1. Gitea will call `loadRepositoryFrom` before `loadActionsFrom`.
25d4f95df2/modules/setting/setting.go (L234-L237)
2. In `loadRepositoryFrom`,
`rootCfg.Section("actions").Key("ENABLED").MustBool(true)` will set
`actions.ENABLED` with `true`.
25d4f95df2/modules/setting/repository.go (L313-L315)
3. In `loadActionsFrom`, `rootCfg.Section("actions")` will get a section
with Actions enabled.
25d4f95df2/modules/setting/actions.go (L23-L26)
Although the cause of the problem was using `true` by copy-paste
mistake, it also surprised me that
**`rootCfg.Section("actions").Key("ENABLED").MustBool(true)` doesn't
only read, but also write.**
Make mailer SMTP check have timed context
Otherwise Gitea may block for long time if the DNS request blocks.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
fix#12192 Support SSH for go get
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: mfk <mfk@hengwei.com.cn>
Co-authored-by: silverwind <me@silverwind.io>
According to the discussion with DanielGibson, the default "20m" seems
too short. It would make LFS fail if the file is large / network is
slow.
I think relaxing this timeout doesn't have side affect. So change the
default value to 24h, IMO that should be long enough.
## ⚠️ BREAKING
If admins want the previous timeout, they should set the setting
`[server].LFS_HTTP_AUTH_EXPIRY`.
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
![image](https://user-images.githubusercontent.com/2114189/236620635-55576955-f95d-4810-b12f-879026a3afdf.png)
close#24449
The unit of `Actions` should be contorlled not only by
`repository.DISABLED_REPO_UNITS` but also by `actions.ENABLED`
in the `app.ini`.
Previously, the permission of the team's `Actions` unit was not
controlled by `actions.Enabled`. So, even if the user sets
`actions.Enabled` to false, he can still select the permission of the
`Actions` unit for the team.
This PR makes the permissions of the team's `Actions` unit also
controlled by `actions.Enabled`. Just append`TypeActions` into
`DisabledRepoUnits` slice when initializing if `actions.Enabled` is
false.
### Changes:
If `Actions` is set disbaled in `app.ini`, like below:
```yaml
[actions]
ENABLED = false
```
1. If user try to create/edit a team, will prompt user that `Actions` is disabled.
![image](https://user-images.githubusercontent.com/33891828/236370415-961082b2-82d2-4d9e-8025-83872ad08cbb.png)
2. `actions` is not displayed in the sidebar on the team details page
![image](https://user-images.githubusercontent.com/33891828/236371817-f39f9bc9-5926-4b88-b5e6-d93617fcfb07.png)
Co-authored-by: @awkwardbunny
This PR adds a Debian package registry. You can follow [this
tutorial](https://www.baeldung.com/linux/create-debian-package) to build
a *.deb package for testing. Source packages are not supported at the
moment and I did not find documentation of the architecture "all" and
how these packages should be treated.
---------
Co-authored-by: Brian Hong <brian@hongs.me>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
## Needs and benefits
[Livebook](https://livebook.dev/) notebooks are used for code
documentation and for deep dives and note-taking in the elixir
ecosystem. Rendering these in these as Markdown on frogejo has many
benefits, since livemd is a subset of markdown. Some of the benefits
are:
- New users of elixir and livebook are scared by unformated .livemd
files, but are shown what they expect
- Sharing a notebook is as easy as sharing a link, no need to install
the software in order to see the results.
[goldmark-meraid ](https://github.com/abhinav/goldmark-mermaid) is a
mermaid-js parser already included in gitea. This makes the .livemd
rendering integration feature complete. With this PR class diagrams, ER
Diagrams, flow charts and much more will be rendered perfectly.
With the additional functionality gitea will be an ideal tool for
sharing resources with fellow software engineers working in the elixir
ecosystem. Allowing the git forge to be used without needing to install
any software.
## Feature Description
This issue requests the .livemd extension to be added as a Markdown
language extension.
- `.livemd` is the extension of Livebook which is an Elixir version of
Jupyter Notebook.
- `.livemd` is` a subset of Markdown.
This would require the .livemd to be recognized as a markdown file. The
Goldmark the markdown parser should handle the parsing and rendering
automatically.
Here is the corresponding commit for GitHub linguist:
https://github.com/github/linguist/pull/5672
Here is a sample page of a livemd file:
https://github.com/github/linguist/blob/master/samples/Markdown/livebook.livemd
## Screenshots
The first screenshot shows how github shows the sample .livemd in the
browser.
The second screenshot shows how mermaid js, renders my development
notebook and its corresponding ER Diagram. The source code can be found
here:
79615f7428/termiNotes.livemd
## Testing
I just changed the file extension from `.livemd`to `.md`and the document
already renders perfectly on codeberg. Check you can it out
[here](https://codeberg.org/lgh/Termi/src/branch/livemd2md/termiNotes.md)
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
The `SHOW_FOOTER_BRANDING` came from year 2015, and it seems nobody ever
uses it. It only shows an GitHub icon which seems unrelated to Gitea, it
doesn't do what document says. So, remove it.
## ⚠️ Breaking
Users can now remove the key `[other].SHOW_FOOTER_BRANDING` from their
app.ini.
Close#24062
At the beginning, I just wanted to fix the warning mentioned by #24062
But, the cookie code really doesn't look good to me, so clean up them.
Complete the TODO on `SetCookie`:
> TODO: Copied from gitea.com/macaron/macaron and should be improved
after macaron removed.
The default access log format has been unnecessarily escaped, leading to
spurious backslashes appearing in log lines.
Additionally, the `RemoteAddr` field includes the port, which breaks
most log parsers attempting to process it. I've added a call to
`net.SplitHostPort()` attempting to isolate the address alone, with a
fallback to the original address if it errs.
Signed-off-by: Gary Moon <gary@garymoon.net>