In `repo.RemoveDependency`, use `PostFormValue` instead of
`PostForm.Get`. The latter requires `ParseForm()` to be called prior,
and in this case, has no benefit over `PostFormValue` anyway (which
calls `ParseForm()` if necessary).
While this currently does not cause any issue as far as I can tell, it
feels like a bug lying in wait for the perfect opportunity. Lets squash
it before it can do harm.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
When subscribing or unsubscribing to/from an issue on the web ui, the
request was posted to a route handled by `repo.IssueWatch`. This
function used `ctx.Req.PostForm.Get()`, erroneously.
`request.PostForm` is *only* available if `request.ParseForm()` has been
called before it. The function in question did not do that. Under some
circumstances, something, somewhere did end up calling `ParseForm()`,
but not in every scenario.
Since we do not need to check for multiple values, the easiest fix here
is to use `ctx.Req.PostFormValue`, which will call `ParseForm()` if
necessary.
Fixes#3516.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
When all repository units are deactivated except for the code unit, the activity tab will not be shown.
Since the activities tab also shows contributing stats, it would be good to show the activities tab also when only code is active.
This commit changes the behavior when the activities tab is shown.
Previous it would only be shown when Issues, Pull-Requests or Releases are activated. Now it would additionally be shown when the code unit is activated.
Refs: #3429
| Before (Code + Issues - Owner) | Before (Code - Viewer) | After (Code + Issues - Owner) | After (Code - Viewer) |
| -- | -- | -- | -- |
|  |  |  |  |
| | `/activity` returns 404 for everyone |  | - |
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3455
Reviewed-by: Otto <otto@codeberg.org>
Co-authored-by: Beowulf <beowulf@beocode.eu>
Co-committed-by: Beowulf <beowulf@beocode.eu>
Now only show the "code search" on the repo home page, because it only
does global search.
So do not show it when viewing file or directory to avoid misleading
users (it doesn't search in a directory)
(cherry picked from commit 993736d838c36e26951b6cfea9c6a549958addd1)
Noteable additions:
- `redefines-builtin-id` forbid variable names that shadow go builtins
- `empty-lines` remove unnecessary empty lines that `gofumpt` does not
remove for some reason
- `superfluous-else` eliminate more superfluous `else` branches
Rules are also sorted alphabetically and I cleaned up various parts of
`.golangci.yml`.
(cherry picked from commit 74f0c84fa4245a20ce6fb87dac1faf2aeeded2a2)
Conflicts:
.golangci.yml
apply the linter recommendations to Forgejo code as well
This adds a new options to releases to hide the links to the automatically generated archives. This is useful, when the automatically generated Archives are broken e.g. because of Submodules.
Note:
This juts hides the Archives from the UI. Users can still download 5the Archive if they know t correct URL.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3139
Reviewed-by: Otto <otto@codeberg.org>
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: JakobDev <jakobdev@gmx.de>
Co-committed-by: JakobDev <jakobdev@gmx.de>
- Add new `Compare` struct to represent comparison between two commits
- Introduce new API endpoint `/compare/*` to get commit comparison
information
- Create new file `repo_compare.go` with the `Compare` struct definition
- Add new file `compare.go` in `routers/api/v1/repo` to handle
comparison logic
- Add new file `compare.go` in `routers/common` to define `CompareInfo`
struct
- Refactor `ParseCompareInfo` function to use `common.CompareInfo`
struct
- Update Swagger documentation to include the new API endpoint for
commit comparison
- Remove duplicate `CompareInfo` struct from
`routers/web/repo/compare.go`
- Adjust base path in Swagger template to be relative (`/api/v1`)
GitHub API
https://docs.github.com/en/rest/commits/commits?apiVersion=2022-11-28#compare-two-commits
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
(cherry picked from commit c70e442ce4b99e2a1f1bf216afcfa1ad78d1925a)
Conflicts:
- routers/api/v1/swagger/repo.go
Conflict resolved by manually adding the lines from the Gitea
PR.
Fix https://github.com/go-gitea/gitea/issues/30428
---
Conflict resolution: trivial and move test to own subtest run directly
after `Normal`.
(cherrypicked commit 9466fec879f4f2c88c7c1e7a5cffba319282ab66)
This PR do some performance optimzations.
- [x] Add `index` for the column `comment_id` of `Attachment` table to
accelerate query from the database.
- [x] Remove unnecessary database queries when viewing issues. Before
some conditions which id = 0 will be sent to the database
- [x] Remove duplicated load posters
- [x] Batch loading attachements, isread of comments on viewing issue
---------
Co-authored-by: Zettat123 <zettat123@gmail.com>
Conflicts:
models/issues/comment_code.go: function was renamed in Forgejo
models/migrations/migrations.go: migration already ported
- Use the correct template that was given when there's an error in
retrieving which git identity should be used.
- Remove the error from the exception list.
This is a squashed result of conflict resolution for the following commits from Gitea:
- 36de5b299b
- 9a93b1816e
- 712e19fa6f
- 83850cc479
It is lacking CSS rule for archived labels, though.
Changes in this commit are authored by:
- 6543
- delvh
- silverwind
This makes signed tags show a badge in the tag list similar to signed
commits in the commit list, and a more verbose block when viewing a
single tag. Works for both GPG and SSH signed tags.
Fixes#1316.
Work sponsored by @glts.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Resolves#29965.
---
Manually tested this by:
- Following the
[installation](https://docs.gitea.com/next/installation/install-with-docker#basics)
guide (but built a local Docker image instead)
- Creating 2 users, one who is the `Owner` of a newly-created repository
and the other a `Collaborator`
- Had the `Collaborator` create a PR that the `Owner` reviews
- `Collaborator` resolves conversation and `Owner` merges PR
And with this change we see that we can no longer see re-request review
button for the `Owner`:
<img width="1351" alt="Screenshot 2024-03-25 at 12 39 18 AM"
src="https://github.com/go-gitea/gitea/assets/60799661/bcd9c579-3cf7-474f-a51e-b436fe1a39a4">
(cherry picked from commit 242b331260925e604150346e61329097d5731e77)
On creation of an empty project (no template) a default board will be
created instead of falling back to the uneditable pseudo-board.
Every project now has to have exactly one default boards. As a
consequence, you cannot unset a board as default, instead you have to
set another board as default. Existing projects will be modified using a
cron job, additionally this check will run every midnight by default.
Deleting the default board is not allowed, you have to set another board
as default to do it.
Fixes#29873Fixes#14679 along the way
Fixes#29853
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit e5160185ed65fd1c2bcb2fc7dc7e0b5514ddb299)
Conflicts:
options/locale/locale_en-US.ini
trivial conflict because Forgejo strings do not have
surrounding double quotes
- Currently protected branch rules do not apply to admins, however in
some cases (like in the case of Forgejo project) you might also want to
apply these rules to admins to avoid accidental merges.
- Add new option to configure this on a per-rule basis.
- Adds integration tests.
- Resolves#65
(cherry picked from commit f8ab9dafb7a173a35e9308f8f784735b0f822439)
Conflicts:
routers/web/repo/fork.go
trivial context conflict, the file does not exist in Forgejo
Fix#28761Fix#27884Fix#28093
## Changes
### Rerun all jobs
When rerun all jobs, status of the jobs with `needs` will be set to
`blocked` instead of `waiting`. Therefore, these jobs will not run until
the required jobs are completed.
### Rerun a single job
When a single job is rerun, its dependents should also be rerun, just
like GitHub does
(https://github.com/go-gitea/gitea/issues/28761#issuecomment-2008620820).
In this case, only the specified job will be set to `waiting`, its
dependents will be set to `blocked` to wait the job.
### Show warning if every job has `needs`
If every job in a workflow has `needs`, all jobs will be blocked and no
job can be run. So I add a warning message.
<img
src="https://github.com/go-gitea/gitea/assets/15528715/88f43511-2360-465d-be96-ee92b57ff67b"
width="480px" />
(cherry picked from commit 2f060c5834d81f0317c795fc281f9a07e03e5962)
The error message:
`editor.file_changed_while_editing = The file contents have changed
since you started editing. <a target="_blank" rel="noopener noreferrer"
href="%s">Click here</a> to see them or <strong>Commit Changes
again</strong> to overwrite them.`
Is re-used in inappropriate contexts. The link in the key goes to a 404
when the key is used in a situation where the file contents have not
changed.
Added two new keys to differentiate commit id mismatch and push out of
date conditions.
(cherry picked from commit 16e360099d0a515d429538ec88cff1f3ede23fb4)
- If a branch cannot be renamed due to a protected branch rule, show
this error in the UI instead of throwing an internal server error.
- Add integration test (also simplify the existing one).
- Resolves#2751
Fix#28157
This PR fix the possible bugs about actions schedule.
- Move `UpdateRepositoryUnit` and `SetRepoDefaultBranch` from models to
service layer
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when actions unit has been disabled
or global disabled.
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when default branch changed.
(cherry picked from commit 97292da960)
Conflicts:
modules/actions/github.go
routers/web/repo/setting/default_branch.go
routers/web/repo/setting/setting.go
services/repository/branch.go
services/repository/setting.go
tests/integration/actions_trigger_test.go
shields.io uses dashes to separate parts of the badge it needs to
return. If our label or text parts contain dashes, we need to encode
those for shields.io to recognise what we want it to do, and to have the
correct text on the badge, too.
Fortunately, this is as simple as replacing all dashes with double
dashes in both the label and the text parts. We do not need to do the
same for the color, because that part is not user controlled.
This fixes the badges for cases when a workflow name includes dashes, or
when a release's tag name does.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This PR do some loading speed optimization for feeds user interface
pages.
- Load action users batchly but not one by one.
- Load action repositories batchly but not one by one.
- Load action's Repo Owners batchly but not one by one.
- Load action's possible issues batchly but not one by one.
- Load action's possible comments batchly but not one by one.
(cherry picked from commit aed3b53abdd02a3ffbf9e8eb90272ff567333073)
It's unnecessary to detect the repository object format from git
repository. Just use the repository's object format name.
(cherry picked from commit 3c6fc25a77c37d50686caa495d27a31dcef7f75f)
Conflicts:
services/pull/pull.go
meilisearch does not have an search option to contorl fuzzynes per query
right now:
- https://github.com/meilisearch/meilisearch/issues/1192
- https://github.com/orgs/meilisearch/discussions/377
- https://github.com/meilisearch/meilisearch/discussions/1096
so we have to create a workaround by post-filter the search result in
gitea until this is addressed.
For future works I added an option in backend only atm, to enable
fuzzynes for issue indexer too.
And also refactored the code so the fuzzy option is equal in logic to
code indexer
---
*Sponsored by Kithara Software GmbH*
Conflicts:
routers/web/repo/search.go
trivial context confict s/isMatch/isFuzzy/
(cherry picked from commit 25b842df261452a29570ba89ffc3a4842d73f68c)
Conflicts:
routers/web/repo/wiki.go
services/repository/branch.go
services/repository/migrate.go
services/wiki/wiki.go
also apply to Forgejo specific usage of the refactored functions
After repository commit status has been introduced on dashaboard, the
most top SQL comes from `GetLatestCommitStatusForPairs`.
This PR adds a cache for the repository's default branch's latest
combined commit status. When a new commit status updated, the cache will
be marked as invalid.
<img width="998" alt="image"
src="https://github.com/go-gitea/gitea/assets/81045/76759de7-3a83-4d54-8571-278f5422aed3">
(cherry picked from commit e308d25f1b2fe24b4735432b05e5e221879a2705)
Detect broken git hooks by checking if the commit id of branches in DB
is the same with the git repo.
It can help #29338#28277 and maybe more issues.
Users could complain about actions, webhooks, and activities not
working, but they were not aware that it is caused by broken git hooks
unless they could see a warning.
<img width="1348" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/2b92a46d-7f1d-4115-bef4-9f970bd695da">
It should be merged after #29493. Otherwise, users could see a ephemeral
warning after committing and opening the repo home page immediately.
And it also waits for #29495, since the doc link (the anchor part) will
be updated.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit a4bcfb8ef1d5b2b522f78c9560d53ddbdbb02218)
Before this change, if we had more than 200 entries being deferred in
loading, the entire table would get replaced thus losing any event
listeners attached to the elements within the table, such as the elipsis
button and commit list with tippy.
With this change we remove the previous javascript code that replaced
the table and use htmx to replace the table.
htmx attributes added:
- `hx-indicator="tr.notready td.message span"`: attach the loading
spinner to the files whose last commit is still being loaded
- `hx-trigger="load"` trigger the request-replace behavior as soon as
possible
- `hx-swap="morph"`: use the idiomorph morphing algorithm, this is the
thing that makes it so the elipsis button event listener is kept during
the replacement, fixing the bug because we don't actually replace the
table, only modifying it
- `hx-post="{{.LastCommitLoaderURL}}"`: make a post request to this url
to get the table with all of the commit information
As part of this change I removed the handling of partial replacement in
the case we have less than 200 "not ready" files. The first reason is
that I couldn't make htmx replace only a subset of returned elements,
the second reason is that we have a cache implemented in the backend
already so the only cost added is that we query the cache a few times
(which is sure to be populated due to the initial request), and the last
reason is that since the last refactor of this functionality that
removed jQuery we don't properly send the "not ready" entries as the
backend expects `FormData` with `f[]` and we send a JSON with `f` so we
always query for all rows anyway.
# Before
# After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit 937e8b55149388840bbf6c4d7216495bc3dd2fe9)
