Backport #25919 by @wxiaoguang
Before, in dev mode, there might be some error logs like:
```
2023/07/17 13:54:51 ...s/assetfs/layered.go:221:WatchLocalChanges() [E] Unable to watch directory .: lstat /data/work/gitea/custom/templates: no such file or directory
```
Because there is no "custom/templates" directory.
After: ignore such error, no such error message anymore.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #25920 by @KN4CK3R
Got the same problem as #25915 when updating an instance. The
`log.Fatal` should have been marked as breaking in #23911.
This PR adds a notice that the system is shutting down because of the
deprecated setting.
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Backport #25746Fix#25736
Caused by #24048
Right now we only check the activity type for `pull_request` event when
`types` is specified or there are no `types` and filter. If a workflow
only specifies filters but no `types` like this:
```
on:
pull_request:
branches: [main]
```
the workflow will be triggered even if the activity type is not one of
`[opened, reopened, sync]`. We need to check the activity type in this
case.
Backport #25648
Replace #25580Fix#19453
The problem was: when users set "GITEA__XXX__YYY" , the "install page"
doesn't respect it.
So, to make the result consistent and avoid surprising end users, now
the "install page" also writes the environment variables to the config
file.
And, to make things clear, there are enough messages on the UI to tell
users what will happen.
There are some necessary/related changes to `environment-to-ini.go`:
* The "--clear" flag is removed and it was incorrectly written there.
The "clear" operation should be done if INSTALL_LOCK=true
* The "--prefix" flag is removed because it's never used, never
documented and it only causes inconsistent behavior.
The only conflict during backport is "ui divider" in
templates/install.tmpl
Backport #25707 by @KN4CK3R
Fixes (?) #25538
Fixes https://codeberg.org/forgejo/forgejo/issues/972
Regression #23879#23879 introduced a change which prevents read access to packages if a
user is not a member of an organization.
That PR also contained a change which disallows package access if the
team unit is configured with "no access" for packages. I don't think
this change makes sense (at the moment). It may be relevant for private
orgs. But for public or limited orgs that's useless because an
unauthorized user would have more access rights than the team member.
This PR restores the old behaviour "If a user has read access for an
owner, they can read packages".
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Backport #25581 by @wolfogre
Resolve#24789
## ⚠️ BREAKING ⚠️
Before this, `DEFAULT_ACTIONS_URL` cound be set to any custom URLs like
`https://gitea.com` or `http://your-git-server,https://gitea.com`, and
the default value was `https://gitea.com`.
But now, `DEFAULT_ACTIONS_URL` supports only
`github`(`https://github.com`) or `self`(the root url of current Gitea
instance), and the default value is `github`.
If it has configured with a URL, an error log will be displayed and it
will fallback to `github`.
Actually, what we really want to do is always make it
`https://github.com`, however, this may not be acceptable for some
instances of internal use, so there's extra support for `self`, but no
more, even `https://gitea.com`.
Please note that `uses: https://xxx/yyy/zzz` always works and it does
exactly what it is supposed to do.
Although it's breaking, I belive it should be backported to `v1.20` due
to some security issues.
Follow-up on the runner side:
- https://gitea.com/gitea/act_runner/pulls/262
- https://gitea.com/gitea/act/pulls/70
Co-authored-by: Jason Song <i@wolfogre.com>
Backport #25560 by @wolfogre
Fix#25451.
Bugfixes:
- When stopping the zombie or endless tasks, set `LogInStorage` to true
after transferring the file to storage. It was missing, it could write
to a nonexistent file in DBFS because `LogInStorage` was false.
- Always update `ActionTask.Updated` when there's a new state reported
by the runner, even if there's no change. This is to avoid the task
being judged as a zombie task.
Enhancement:
- Support `Stat()` for DBFS file.
- `WriteLogs` refuses to write if it could result in content holes.
Co-authored-by: Jason Song <i@wolfogre.com>
Backport #25537
More fix for #24981
* #24981Close#22361, #25552
* #22361
* #25552
There were many patches for Gitea's sub-commands to satisfy the facts:
* Some sub-commands shouldn't output any log, otherwise the git protocol
would be broken
* Sometimes the users want to see "verbose" or "quiet" outputs
That's a longstanding problem, and very fragile. This PR is only a quick
patch for the problem.
In the future, the sub-command system should be refactored to a clear
solution.
----
Other changes:
* Use `ReplaceAllWriters` to replace
`RemoveAllWriters().AddWriters(writer)`, then it's an atomic operation.
* Remove unnecessary `syncLevelInternal` calls, because
`AddWriters/addWritersInternal` already calls it.
Backport #25480 by @wxiaoguang
Fix#25481
The `InitWorkPathAndCommonConfig` calls `LoadCommonSettings` which does
many checks like "current user is root or not".
Some commands like "environment-to-ini" shouldn't do such check, because
it might be run with "root" user at the moment (eg: the docker's setup
script)
ps: in the future, the docker's setup script should be improved to avoid
Gitea's command running with "root"
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #25330
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
Backport #25395 by @wxiaoguang
That's a longstanding INI package problem: the "MustXxx" calls change
the option values, and the following "Save" will save a lot of garbage
options into the user's config file.
Ideally we should refactor the INI package to a clear solution, but it's
a huge work.
A clear workaround is what this PR does: when "Save", load a clear INI
instance and save it.
Partially fix#25377, the "install" page needs more fine tunes.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The "--config" option is a global option, it shouldn't appear at the
end.
Otherwise it might not be respected in some cases.
Caught by #25330 and use a separate PR to fix it for 1.20
Backport #23911 by @lunny
Follow up #22405Fix#20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #25171 by @silverwind
The plan is that all built-in auth providers use inline SVG for more
flexibility in styling and to get the GitHub icon to follow
`currentcolor`. This only removes the `public/img/auth` directory and
adds the missing svgs to our svg build.
It should map the built-in providers to these SVGs and render them. If
the user has set a Icon URL, it should render that as an `img` tag
instead.
```
gitea-azure-ad
gitea-bitbucket
gitea-discord
gitea-dropbox
gitea-facebook
gitea-gitea
gitea-gitlab
gitea-google
gitea-mastodon
gitea-microsoftonline
gitea-nextcloud
gitea-twitter
gitea-yandex
octicon-mark-github
```
GitHub logo is now white again on dark theme:
<img width="431" alt="Screenshot 2023-06-12 at 21 45 34"
src="https://github.com/go-gitea/gitea/assets/115237/27a43504-d60a-4132-a502-336b25883e4d">
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #25184 by @jtran
Fixes#25160.
`data-source-position` of checkboxes in a task list was incorrect
whenever there was YAML front matter. This would result in issue content
or PR descriptions getting corrupted with random `x` or space characters
when a user checked or unchecked a task.
Co-authored-by: Jonathan Tran <jon@allspice.io>
Backport #25143 by @lafriks
If redirect_to parameter has set value starting with `\\example.com`
redirect will be created with header `Location: /\\example.com` that
will redirect to example.com domain.
Co-authored-by: Lauris BH <lauris@nix.lv>
Fixes some issues with the swagger documentation for the new multiple
files API endpoint (#24887) which were overlooked when submitting the
original PR:
1. add some missing parameter descriptions
2. set correct `required` option for required parameters
3. change endpoint description to match it full functionality (every
kind of file modification is supported, not just creating and updating)
## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
- `activitypub`
- `admin` (hidden if user is not a site admin)
- `misc`
- `notification`
- `organization`
- `package`
- `issue`
- `repository`
- `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
- `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
- `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection
### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">
## tokenRequiresScopes Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error
## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
- _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
- _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
- _This should be addressed in this PR_
- For example:
```go
m.Group("/users/{username}/orgs", func() {
m.Get("", reqToken(), org.ListUserOrgs)
m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
```
## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default
Closes#24501Closes#24799
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Before, Gitea shows the database table stats on the `admin dashboard`
page.
It has some problems:
* `count(*)` is quite heavy. If tables have many records, this blocks
loading the admin page blocks for a long time
* Some users had even reported issues that they can't visit their admin
page because this page causes blocking or `50x error (reverse proxy
timeout)`
* The `actions` stat is not useful. The table is simply too large. Does
it really matter if it contains 1,000,000 rows or 9,999,999 rows?
* The translation `admin.dashboard.statistic_info` is difficult to
maintain.
So, this PR uses a separate page to show the stats and removes the
`actions` stat.
## ⚠️ BREAKING
The `actions` Prometheus metrics collector has been removed for the
reasons mentioned beforehand.
Please do not rely on its output anymore.
The INI package has many bugs and quirks, and in fact it is
unmaintained.
This PR is the first step for the INI package refactoring:
* Use Gitea's "config_provider" to provide INI access
* Deprecate the INI package by golangci.yml rule
It's been disabled by default since 1.17
(https://github.com/go-gitea/gitea/pull/18914), and it never really
delivered any benefit except being another cache layer that has its own
unsolved invalidation issues. HTTP cache works, we don't need two cache
layers at the browser for assets.
## ⚠️ BREAKING
You can remove the config `[ui].USE_SERVICE_WORKER` from your `app.ini`
now.
The admin config page has been broken for many many times, a little
refactoring would make this page panic.
So, add a test for it, and add another test to cover the 500 error page.
Co-authored-by: Giteabot <teabot@gitea.io>
This PR creates an API endpoint for creating/updating/deleting multiple
files in one API call similar to the solution provided by
[GitLab](https://docs.gitlab.com/ee/api/commits.html#create-a-commit-with-multiple-files-and-actions).
To archive this, the CreateOrUpdateRepoFile and DeleteRepoFIle functions
in files service are unified into one function supporting multiple files
and actions.
Resolves#14619
gitea.com experienced the corrupted LevelQueue bug again.
I think the problem is clear now: if the keys in LevelDB went
out-of-sync, the LevelQueue itself doesn't have the ability to recover,
eg:
* LevelQueue.Len() reports 100
* LevelQueue.LPop() reports ErrNotFound = errors.New("no key found")
So it needs to dive into the LevelDB to remove all keys to recover the
corrupted LevelQueue.
More comments are in TestCorruptedLevelQueue.
As discussed in
https://github.com/go-gitea/gitea/pull/24953#issuecomment-1565630156.
## ⚠️ BREAKING ⚠️
1. The `ui.THEME_COLOR_META_TAG` setting has been removed. If you still
need to set the `theme-color` meta tag, add it via
`$GITEA_CUSTOM/templates/custom/header.tmpl` instead.
2. The non-standard `default-theme` meta-tag added in
https://github.com/go-gitea/gitea/pull/13809 has been removed. Third
party code that needs to obtain the currently loaded theme should use
the `theme-<name>` class on the `<html>` node instead, which reflect the
currently active theme.
The old EventWriter's Run does:
```go
for {
handlePause()
select {
case event <- Queue:
write the log event ...
}
}
```
So, if an event writer is started before the logger is paused, there is
a chance that the logger isn't paused for the first message.
The new logic is:
```go
for {
select {
case event <- Queue:
handlePause()
write the log event ...
}
}
```
Then the event writer can be correctly paused
The old process manager's `Trace` function by default calls `log.Printf`
to output "trace" level logs. That's not ideal because by default the
trace level logs should not be outputted. In history it didn't cause
problems because there was no other call to the process manager before
the logger system's initialization.
But if there is any package using the process manager before the "Trace"
function gets assigned to the logger system's trace function, the
process manager will outputs unexpected verbose messages, this behavior
is not expected in most cases.
Now, the logger system also uses process manager to manage its goroutine
contexts, so it's the time to fix the old "trace" behavior: by default,
do not output the trace level messages. Fix#24951
Before there was a "graceful function": RunWithShutdownFns, it's mainly
for some modules which doesn't support context.
The old queue system doesn't work well with context, so the old queues
need it.
After the queue refactoring, the new queue works with context well, so,
use Golang context as much as possible, the `RunWithShutdownFns` could
be removed (replaced by RunWithCancel for context cancel mechanism), the
related code could be simplified.
This PR also fixes some legacy queue-init problems, eg:
* typo : archiver: "unable to create codes indexer queue" => "unable to
create repo-archive queue"
* no nil check for failed queues, which causes unfriendly panic
After this PR, many goroutines could have better display name:
This PR replaces all string refName as a type `git.RefName` to make the
code more maintainable.
Fix#15367
Replaces #23070
It also fixed a bug that tags are not sync because `git remote --prune
origin` will not remove local tags if remote removed.
We in fact should use `git fetch --prune --tags origin` but not `git
remote update origin` to do the sync.
Some answer from ChatGPT as ref.
> If the git fetch --prune --tags command is not working as expected,
there could be a few reasons why. Here are a few things to check:
>
>Make sure that you have the latest version of Git installed on your
system. You can check the version by running git --version in your
terminal. If you have an outdated version, try updating Git and see if
that resolves the issue.
>
>Check that your Git repository is properly configured to track the
remote repository's tags. You can check this by running git config
--get-all remote.origin.fetch and verifying that it includes
+refs/tags/*:refs/tags/*. If it does not, you can add it by running git
config --add remote.origin.fetch "+refs/tags/*:refs/tags/*".
>
>Verify that the tags you are trying to prune actually exist on the
remote repository. You can do this by running git ls-remote --tags
origin to list all the tags on the remote repository.
>
>Check if any local tags have been created that match the names of tags
on the remote repository. If so, these local tags may be preventing the
git fetch --prune --tags command from working properly. You can delete
local tags using the git tag -d command.
---------
Co-authored-by: delvh <dev.lh@web.de>
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves#2175.
## Screenshots
The Design was mostly copied from the Projects Board.
## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.
## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration
**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
1. non-dev mode is treated as prod mode, to protect users from
accidentally running in dev mode if there is a typo in this value.
2. in dev mode, do not need to really exit if there are template errors,
because the template errors could be fixed by developer soon and the
templates get reloaded, help:
* https://github.com/go-gitea/gitea/issues/24845#issuecomment-1557615382
3. Fine tune the mail template loading message.
