- In order to determine if the "Add more..." tab should be shown, the
template has to know if the repository has all units enabled, this is
done in the repository header which can be shown for quite a lot of
pages (code, issues, projects, actions etc.)
- This was previously set in the `RepoRefByType` function, which would
be called by pages such as code, issues and releases, but it was not
being called for all pages such as actions, packages and wiki. Which
would in turn incorrectly show the "Add more..." button when it
shouldn't.
- Now call it from the template itself, so the value is 'always' loaded
when necessary.
Previously, the repo wiki was hardcoded to use `master` as its branch,
this change makes it possible to use `main` (or something else, governed
by `[repository].DEFAULT_BRANCH`, a setting that already exists and
defaults to `main`).
The way it is done is that a new column is added to the `repository`
table: `wiki_branch`. The migration will make existing repositories
default to `master`, for compatibility's sake, even if they don't have a
Wiki (because it's easier to do that). Newly created repositories will
default to `[repository].DEFAULT_BRANCH` instead.
The Wiki service was updated to use the branch name stored in the
database, and fall back to the default if it is empty.
Old repositories with Wikis using the older `master` branch will have
the option to do a one-time transition to `main`, available via the
repository settings in the "Danger Zone". This option will only be
available for repositories that have the internal wiki enabled, it is
not empty, and the wiki branch is not `[repository].DEFAULT_BRANCH`.
When migrating a repository with a Wiki, Forgejo will use the same
branch name for the wiki as the source repository did. If that's not the
same as the default, the option to normalize it will be available after
the migration's done.
Additionally, the `/api/v1/{owner}/{repo}` endpoint was updated: it will
now include the wiki branch name in `GET` requests, and allow changing
the wiki branch via `PATCH`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit d87c526d2a)
## Purpose
This is a refactor toward building an abstraction over managing git
repositories.
Afterwards, it does not matter anymore if they are stored on the local
disk or somewhere remote.
## What this PR changes
We used `git.OpenRepository` everywhere previously.
Now, we should split them into two distinct functions:
Firstly, there are temporary repositories which do not change:
```go
git.OpenRepository(ctx, diskPath)
```
Gitea managed repositories having a record in the database in the
`repository` table are moved into the new package `gitrepo`:
```go
gitrepo.OpenRepository(ctx, repo_model.Repo)
```
Why is `repo_model.Repository` the second parameter instead of file
path?
Because then we can easily adapt our repository storage strategy.
The repositories can be stored locally, however, they could just as well
be stored on a remote server.
## Further changes in other PRs
- A Git Command wrapper on package `gitrepo` could be created. i.e.
`NewCommand(ctx, repo_model.Repository, commands...)`. `git.RunOpts{Dir:
repo.RepoPath()}`, the directory should be empty before invoking this
method and it can be filled in the function only. #28940
- Remove the `RepoPath()`/`WikiPath()` functions to reduce the
possibility of mistakes.
---------
Co-authored-by: delvh <dev.lh@web.de>
Fixes#26548
This PR refactors the rendering of markup links. The old code uses
`strings.Replace` to change some urls while the new code uses more
context to decide which link should be generated.
The added tests should ensure the same output for the old and new
behaviour (besides the bug).
We may need to refactor the rendering a bit more to make it clear how
the different helper methods render the input string. There are lots of
options (resolve links / images / mentions / git hashes / emojis / ...)
but you don't really know what helper uses which options. For example,
we currently support images in the user description which should not be
allowed I think:
<details>
<summary>Profile</summary>
https://try.gitea.io/KN4CK3R
</details>
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
- Currently the repository description uses the same sanitizer as a
normal markdown document. This means that element such as heading and
images are allowed and can be abused.
- Create a minimal restricted sanitizer for the repository description,
which only allows what the postprocessor currently allows, which are
links and emojis.
- Added unit testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1202
- Resolves https://codeberg.org/Codeberg/Community/issues/1122
(cherry picked from commit 631c87cc23)
Co-authored-by: Gusted <postmaster@gusted.xyz>
This PR adds a new field `RemoteAddress` to both mirror types which
contains the sanitized remote address for easier (database) access to
that information. Will be used in the audit PR if merged.
This PR will display a pull request creation hint on the repository home
page when there are newly created branches with no pull request. Only
the recent 6 hours and 2 updated branches will be displayed.
Inspired by #14003
Replace #14003Resolves#311Resolves#13196Resolves#23743
co-authored by @kolaente
releated to #21820
- Split `Size` in repository table as two new colunms, one is `GitSize`
for git size, the other is `LFSSize` for lfs data. still store full size
in `Size` colunm.
- Show full size on ui, but show each of them by a `title`; example:
- Return full size in api response.
---------
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: DmitryFrolovTri <23313323+DmitryFrolovTri@users.noreply.github.com>
Co-authored-by: Giteabot <teabot@gitea.io>
## ⚠️ Breaking
The `log.<mode>.<logger>` style config has been dropped. If you used it,
please check the new config manual & app.example.ini to make your
instance output logs as expected.
Although many legacy options still work, it's encouraged to upgrade to
the new options.
The SMTP logger is deleted because SMTP is not suitable to collect logs.
If you have manually configured Gitea log options, please confirm the
logger system works as expected after upgrading.
## Description
Close#12082 and maybe more log-related issues, resolve some related
FIXMEs in old code (which seems unfixable before)
Just like rewriting queue #24505 : make code maintainable, clear legacy
bugs, and add the ability to support more writers (eg: JSON, structured
log)
There is a new document (with examples): `logging-config.en-us.md`
This PR is safer than the queue rewriting, because it's just for
logging, it won't break other logic.
## The old problems
The logging system is quite old and difficult to maintain:
* Unclear concepts: Logger, NamedLogger, MultiChannelledLogger,
SubLogger, EventLogger, WriterLogger etc
* Some code is diffuclt to konw whether it is right:
`log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs
`log.DelLogger("console")`
* The old system heavily depends on ini config system, it's difficult to
create new logger for different purpose, and it's very fragile.
* The "color" trick is difficult to use and read, many colors are
unnecessary, and in the future structured log could help
* It's difficult to add other log formats, eg: JSON format
* The log outputer doesn't have full control of its goroutine, it's
difficult to make outputer have advanced behaviors
* The logs could be lost in some cases: eg: no Fatal error when using
CLI.
* Config options are passed by JSON, which is quite fragile.
* INI package makes the KEY in `[log]` section visible in `[log.sub1]`
and `[log.sub1.subA]`, this behavior is quite fragile and would cause
more unclear problems, and there is no strong requirement to support
`log.<mode>.<logger>` syntax.
## The new design
See `logger.go` for documents.
## Screenshot
<details>
</details>
## TODO
* [x] add some new tests
* [x] fix some tests
* [x] test some sub-commands (manually ....)
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
This PR is a refactor at the beginning. And now it did 4 things.
- [x] Move renaming organizaiton and user logics into services layer and
merged as one function
- [x] Support rename a user capitalization only. For example, rename the
user from `Lunny` to `lunny`. We just need to change one table `user`
and others should not be touched.
- [x] Before this PR, some renaming were missed like `agit`
- [x] Fix bug the API reutrned from `http.StatusNoContent` to `http.StatusOK`
fix#12192 Support SSH for go get
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: mfk <mfk@hengwei.com.cn>
Co-authored-by: silverwind <me@silverwind.io>
There was only one `IsRepositoryExist` function, it did: `has && isDir`
However it's not right, and it would cause 500 error when creating a new
repository if the dir exists.
Then, it was changed to `has || isDir`, it is still incorrect, it
affects the "adopt repo" logic.
To make the logic clear:
* IsRepositoryModelOrDirExist
* IsRepositoryModelExist
In Go code, HTMLURL should be only used for external systems, like
API/webhook/mail/notification, etc.
If a URL is used by `Redirect` or rendered in a template, it should be a
relative URL (aka `Link()` in Gitea)
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
partially fix#19345
This PR add some `Link` methods for different objects. The `Link`
methods are not different from `HTMLURL`, they are lack of the absolute
URL. And most of UI `HTMLURL` have been replaced to `Link` so that users
can visit them from a different domain or IP.
This PR also introduces a new javascript configuration
`window.config.reqAppUrl` which is different from `appUrl` which is
still an absolute url but the domain has been replaced to the current
requested domain.
Fix#21994.
And fix#19470.
While generating new repo from a template, it does something like
"commit to git repo, re-fetch repo model from DB, and update default
branch if it's empty".
19d5b2f922/modules/repository/generate.go (L241-L253)
Unfortunately, when load repo from DB, the default branch will be set to
`setting.Repository.DefaultBranch` if it's empty:
19d5b2f922/models/repo/repo.go (L228-L233)
I believe it's a very old temporary patch but has been kept for many
years, see:
[2d2d85bb](https://github.com/go-gitea/gitea/commit/2d2d85bb#diff-1851799b06733db4df3ec74385c1e8850ee5aedee70b8b55366910d22725eea8)
I know it's a risk to delete it, may lead to potential behavioral
changes, but we cannot keep the outdated `FIXME` forever. On the other
hand, an empty `DefaultBranch` does make sense: an empty repo doesn't
have one conceptually (actually, Gitea will still set it to
`setting.Repository.DefaultBranch` to make it safer).
Change all license headers to comply with REUSE specification.
Fix#16132
Co-authored-by: flynnnnnnnnnn <flynnnnnnnnnn@github>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
This PR adds a context parameter to a bunch of methods. Some helper
`xxxCtx()` methods got replaced with the normal name now.
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
A lot of our code is repeatedly testing if individual errors are
specific types of Not Exist errors. This is repetitative and unnecesary.
`Unwrap() error` provides a common way of labelling an error as a
NotExist error and we can/should use this.
This PR has chosen to use the common `io/fs` errors e.g.
`fs.ErrNotExist` for our errors. This is in some ways not completely
correct as these are not filesystem errors but it seems like a
reasonable thing to do and would allow us to simplify a lot of our code
to `errors.Is(err, fs.ErrNotExist)` instead of
`package.IsErr...NotExist(err)`
I am open to suggestions to use a different base error - perhaps
`models/db.ErrNotExist` if that would be felt to be better.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
* Move access and repo permission to models/perm/access
* fix test
* fix git test
* Move functions sequence
* Some improvements per @KN4CK3R and @delvh
* Move issues related code to models/issues
* Move some issues related sub package
* Merge
* Fix test
* Fix test
* Fix test
* Fix test
* Rename some files
The last PR about clone buttons introduced an JS error when visiting an empty repo page:
* https://github.com/go-gitea/gitea/pull/19028
* `Uncaught ReferenceError: isSSH is not defined`, because the variables are scoped and doesn't share between sub templates.
This:
1. Simplify `templates/repo/clone_buttons.tmpl` and make code clear
2. Move most JS code into `initRepoCloneLink`
3. Remove unused `CloneLink.Git`
4. Remove `ctx.Data["DisableSSH"] / ctx.Data["ExposeAnonSSH"] / ctx.Data["DisableHTTP"]`, and only set them when is is needed (eg: deploy keys / ssh keys)
5. Introduce `Data["CloneButton*"]` to provide data for clone buttons and links
6. Introduce `Data["RepoCloneLink"]` for the repo clone link (not the wiki)
7. Remove most `ctx.Data["PageIsWiki"]` because it has been set in the `/wiki` middleware
8. Remove incorrect `quickstart` class in `migrating.tmpl`
* Avoid database lookups for `DescriptionHTML`
- Don't Compose meta's for DescriptionHTML, they are only needed in
order to correctly format and show issue's but it's highly unlikely that
a repository description will refer to a local issue.
Using 125 Connections for 5 seconds: on `/explore/repos`(which is the most
noticeable usage by this function's database lookups):
Before:
Statistics Avg Stdev Max
Reqs/sec 569.41 506.05 2715.00
Latency 214.27ms 16.60ms 294.84ms
HTTP codes:
1xx - 0, 2xx - 2974, 3xx - 0, 4xx - 0, 5xx - 0
others - 0
Throughput: 27.17MB/s
After:
Statistics Avg Stdev Max
Reqs/sec 1585.04 789.84 4144.56
Latency 78.89ms 15.89ms 206.94ms
HTTP codes:
1xx - 0, 2xx - 7975, 3xx - 0, 4xx - 0, 5xx - 0
others - 0
Throughput: 73.85MB/s
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
