forgejo/cmd/hook.go

791 lines
20 KiB
Go
Raw Normal View History

// Copyright 2017 The Gitea Authors. All rights reserved.
// SPDX-License-Identifier: MIT
package cmd
import (
"bufio"
"bytes"
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
"context"
"fmt"
"io"
"os"
"strconv"
"strings"
"time"
"code.gitea.io/gitea/modules/git"
"code.gitea.io/gitea/modules/private"
repo_module "code.gitea.io/gitea/modules/repository"
"code.gitea.io/gitea/modules/setting"
"github.com/urfave/cli"
)
const (
hookBatchSize = 30
)
var (
// CmdHook represents the available hooks sub-command.
CmdHook = cli.Command{
Name: "hook",
Usage: "Delegate commands to corresponding Git hooks",
Description: "This should only be called by Git",
Subcommands: []cli.Command{
subcmdHookPreReceive,
subcmdHookUpdate,
subcmdHookPostReceive,
subcmdHookProcReceive,
},
}
subcmdHookPreReceive = cli.Command{
Name: "pre-receive",
Usage: "Delegate pre-receive Git hook",
Description: "This command should only be called by Git",
Action: runHookPreReceive,
Flags: []cli.Flag{
cli.BoolFlag{
Name: "debug",
},
},
}
subcmdHookUpdate = cli.Command{
Name: "update",
Usage: "Delegate update Git hook",
Description: "This command should only be called by Git",
Action: runHookUpdate,
Flags: []cli.Flag{
cli.BoolFlag{
Name: "debug",
},
},
}
subcmdHookPostReceive = cli.Command{
Name: "post-receive",
Usage: "Delegate post-receive Git hook",
Description: "This command should only be called by Git",
Action: runHookPostReceive,
Flags: []cli.Flag{
cli.BoolFlag{
Name: "debug",
},
},
}
// Note: new hook since git 2.29
subcmdHookProcReceive = cli.Command{
Name: "proc-receive",
Usage: "Delegate proc-receive Git hook",
Description: "This command should only be called by Git",
Action: runHookProcReceive,
Flags: []cli.Flag{
cli.BoolFlag{
Name: "debug",
},
},
}
)
type delayWriter struct {
internal io.Writer
buf *bytes.Buffer
timer *time.Timer
}
func newDelayWriter(internal io.Writer, delay time.Duration) *delayWriter {
timer := time.NewTimer(delay)
return &delayWriter{
internal: internal,
buf: &bytes.Buffer{},
timer: timer,
}
}
func (d *delayWriter) Write(p []byte) (n int, err error) {
if d.buf != nil {
select {
case <-d.timer.C:
_, err := d.internal.Write(d.buf.Bytes())
if err != nil {
return 0, err
}
d.buf = nil
return d.internal.Write(p)
default:
return d.buf.Write(p)
}
}
return d.internal.Write(p)
}
func (d *delayWriter) WriteString(s string) (n int, err error) {
if d.buf != nil {
select {
case <-d.timer.C:
_, err := d.internal.Write(d.buf.Bytes())
if err != nil {
return 0, err
}
d.buf = nil
return d.internal.Write([]byte(s))
default:
return d.buf.WriteString(s)
}
}
return d.internal.Write([]byte(s))
}
func (d *delayWriter) Close() error {
if d == nil {
return nil
}
Rewrite queue (#24505) # ⚠️ Breaking Many deprecated queue config options are removed (actually, they should have been removed in 1.18/1.19). If you see the fatal message when starting Gitea: "Please update your app.ini to remove deprecated config options", please follow the error messages to remove these options from your app.ini. Example: ``` 2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]` 2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]` 2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options ``` Many options in `[queue]` are are dropped, including: `WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`, `BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed from app.ini. # The problem The old queue package has some legacy problems: * complexity: I doubt few people could tell how it works. * maintainability: Too many channels and mutex/cond are mixed together, too many different structs/interfaces depends each other. * stability: due to the complexity & maintainability, sometimes there are strange bugs and difficult to debug, and some code doesn't have test (indeed some code is difficult to test because a lot of things are mixed together). * general applicability: although it is called "queue", its behavior is not a well-known queue. * scalability: it doesn't seem easy to make it work with a cluster without breaking its behaviors. It came from some very old code to "avoid breaking", however, its technical debt is too heavy now. It's a good time to introduce a better "queue" package. # The new queue package It keeps using old config and concept as much as possible. * It only contains two major kinds of concepts: * The "base queue": channel, levelqueue, redis * They have the same abstraction, the same interface, and they are tested by the same testing code. * The "WokerPoolQueue", it uses the "base queue" to provide "worker pool" function, calls the "handler" to process the data in the base queue. * The new code doesn't do "PushBack" * Think about a queue with many workers, the "PushBack" can't guarantee the order for re-queued unhandled items, so in new code it just does "normal push" * The new code doesn't do "pause/resume" * The "pause/resume" was designed to handle some handler's failure: eg: document indexer (elasticsearch) is down * If a queue is paused for long time, either the producers blocks or the new items are dropped. * The new code doesn't do such "pause/resume" trick, it's not a common queue's behavior and it doesn't help much. * If there are unhandled items, the "push" function just blocks for a few seconds and then re-queue them and retry. * The new code doesn't do "worker booster" * Gitea's queue's handlers are light functions, the cost is only the go-routine, so it doesn't make sense to "boost" them. * The new code only use "max worker number" to limit the concurrent workers. * The new "Push" never blocks forever * Instead of creating more and more blocking goroutines, return an error is more friendly to the server and to the end user. There are more details in code comments: eg: the "Flush" problem, the strange "code.index" hanging problem, the "immediate" queue problem. Almost ready for review. TODO: * [x] add some necessary comments during review * [x] add some more tests if necessary * [x] update documents and config options * [x] test max worker / active worker * [x] re-run the CI tasks to see whether any test is flaky * [x] improve the `handleOldLengthConfiguration` to provide more friendly messages * [x] fine tune default config values (eg: length?) ## Code coverage: ![image](https://user-images.githubusercontent.com/2114189/236620635-55576955-f95d-4810-b12f-879026a3afdf.png)
2023-05-08 13:49:59 +02:00
stopped := d.timer.Stop()
if stopped || d.buf == nil {
return nil
}
_, err := d.internal.Write(d.buf.Bytes())
d.buf = nil
return err
}
type nilWriter struct{}
func (n *nilWriter) Write(p []byte) (int, error) {
return len(p), nil
}
func (n *nilWriter) WriteString(s string) (int, error) {
return len(s), nil
}
func runHookPreReceive(c *cli.Context) error {
if isInternal, _ := strconv.ParseBool(os.Getenv(repo_module.EnvIsInternal)); isInternal {
return nil
}
ctx, cancel := installSignals()
defer cancel()
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
setup(ctx, c.Bool("debug"))
if len(os.Getenv("SSH_ORIGINAL_COMMAND")) == 0 {
if setting.OnlyAllowPushIfGiteaEnvironmentSet {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
return fail(ctx, `Rejecting changes as Gitea environment not set.
If you are pushing over SSH you must push with a key managed by
Gitea or set your environment appropriately.`, "")
}
return nil
}
// the environment is set by serv command
isWiki, _ := strconv.ParseBool(os.Getenv(repo_module.EnvRepoIsWiki))
username := os.Getenv(repo_module.EnvRepoUsername)
reponame := os.Getenv(repo_module.EnvRepoName)
userID, _ := strconv.ParseInt(os.Getenv(repo_module.EnvPusherID), 10, 64)
prID, _ := strconv.ParseInt(os.Getenv(repo_module.EnvPRID), 10, 64)
deployKeyID, _ := strconv.ParseInt(os.Getenv(repo_module.EnvDeployKeyID), 10, 64)
Implement actions (#21937) Close #13539. Co-authored by: @lunny @appleboy @fuxiaohei and others. Related projects: - https://gitea.com/gitea/actions-proto-def - https://gitea.com/gitea/actions-proto-go - https://gitea.com/gitea/act - https://gitea.com/gitea/act_runner ### Summary The target of this PR is to bring a basic implementation of "Actions", an internal CI/CD system of Gitea. That means even though it has been merged, the state of the feature is **EXPERIMENTAL**, and please note that: - It is disabled by default; - It shouldn't be used in a production environment currently; - It shouldn't be used in a public Gitea instance currently; - Breaking changes may be made before it's stable. **Please comment on #13539 if you have any different product design ideas**, all decisions reached there will be adopted here. But in this PR, we don't talk about **naming, feature-creep or alternatives**. ### ⚠️ Breaking `gitea-actions` will become a reserved user name. If a user with the name already exists in the database, it is recommended to rename it. ### Some important reviews - What is `DEFAULT_ACTIONS_URL` in `app.ini` for? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1055954954 - Why the api for runners is not under the normal `/api/v1` prefix? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1061173592 - Why DBFS? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1061301178 - Why ignore events triggered by `gitea-actions` bot? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1063254103 - Why there's no permission control for actions? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1090229868 ### What it looks like <details> #### Manage runners <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205870657-c72f590e-2e08-4cd4-be7f-2e0abb299bbf.png"> #### List runs <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205872794-50fde990-2b45-48c1-a178-908e4ec5b627.png"> #### View logs <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205872501-9b7b9000-9542-4991-8f55-18ccdada77c3.png"> </details> ### How to try it <details> #### 1. Start Gitea Clone this branch and [install from source](https://docs.gitea.io/en-us/install-from-source). Add additional configurations in `app.ini` to enable Actions: ```ini [actions] ENABLED = true ``` Start it. If all is well, you'll see the management page of runners: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205877365-8e30a780-9b10-4154-b3e8-ee6c3cb35a59.png"> #### 2. Start runner Clone the [act_runner](https://gitea.com/gitea/act_runner), and follow the [README](https://gitea.com/gitea/act_runner/src/branch/main/README.md) to start it. If all is well, you'll see a new runner has been added: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205878000-216f5937-e696-470d-b66c-8473987d91c3.png"> #### 3. Enable actions for a repo Create a new repo or open an existing one, check the `Actions` checkbox in settings and submit. <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205879705-53e09208-73c0-4b3e-a123-2dcf9aba4b9c.png"> <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205879383-23f3d08f-1a85-41dd-a8b3-54e2ee6453e8.png"> If all is well, you'll see a new tab "Actions": <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205881648-a8072d8c-5803-4d76-b8a8-9b2fb49516c1.png"> #### 4. Upload workflow files Upload some workflow files to `.gitea/workflows/xxx.yaml`, you can follow the [quickstart](https://docs.github.com/en/actions/quickstart) of GitHub Actions. Yes, Gitea Actions is compatible with GitHub Actions in most cases, you can use the same demo: ```yaml name: GitHub Actions Demo run-name: ${{ github.actor }} is testing out GitHub Actions 🚀 on: [push] jobs: Explore-GitHub-Actions: runs-on: ubuntu-latest steps: - run: echo "🎉 The job was automatically triggered by a ${{ github.event_name }} event." - run: echo "🐧 This job is now running on a ${{ runner.os }} server hosted by GitHub!" - run: echo "🔎 The name of your branch is ${{ github.ref }} and your repository is ${{ github.repository }}." - name: Check out repository code uses: actions/checkout@v3 - run: echo "💡 The ${{ github.repository }} repository has been cloned to the runner." - run: echo "🖥️ The workflow is now ready to test your code on the runner." - name: List files in the repository run: | ls ${{ github.workspace }} - run: echo "🍏 This job's status is ${{ job.status }}." ``` If all is well, you'll see a new run in `Actions` tab: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205884473-79a874bc-171b-4aaf-acd5-0241a45c3b53.png"> #### 5. Check the logs of jobs Click a run and you'll see the logs: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205884800-994b0374-67f7-48ff-be9a-4c53f3141547.png"> #### 6. Go on You can try more examples in [the documents](https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions) of GitHub Actions, then you might find a lot of bugs. Come on, PRs are welcome. </details> See also: [Feature Preview: Gitea Actions](https://blog.gitea.io/2022/12/feature-preview-gitea-actions/) --------- Co-authored-by: a1012112796 <1012112796@qq.com> Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com> Co-authored-by: delvh <dev.lh@web.de> Co-authored-by: ChristopherHX <christopher.homberger@web.de> Co-authored-by: John Olheiser <john.olheiser@gmail.com>
2023-01-31 02:45:19 +01:00
actionPerm, _ := strconv.ParseInt(os.Getenv(repo_module.EnvActionPerm), 10, 64)
hookOptions := private.HookOptions{
UserID: userID,
GitAlternativeObjectDirectories: os.Getenv(private.GitAlternativeObjectDirectories),
GitObjectDirectory: os.Getenv(private.GitObjectDirectory),
GitQuarantinePath: os.Getenv(private.GitQuarantinePath),
GitPushOptions: pushOptions(),
PullRequestID: prID,
DeployKeyID: deployKeyID,
Implement actions (#21937) Close #13539. Co-authored by: @lunny @appleboy @fuxiaohei and others. Related projects: - https://gitea.com/gitea/actions-proto-def - https://gitea.com/gitea/actions-proto-go - https://gitea.com/gitea/act - https://gitea.com/gitea/act_runner ### Summary The target of this PR is to bring a basic implementation of "Actions", an internal CI/CD system of Gitea. That means even though it has been merged, the state of the feature is **EXPERIMENTAL**, and please note that: - It is disabled by default; - It shouldn't be used in a production environment currently; - It shouldn't be used in a public Gitea instance currently; - Breaking changes may be made before it's stable. **Please comment on #13539 if you have any different product design ideas**, all decisions reached there will be adopted here. But in this PR, we don't talk about **naming, feature-creep or alternatives**. ### ⚠️ Breaking `gitea-actions` will become a reserved user name. If a user with the name already exists in the database, it is recommended to rename it. ### Some important reviews - What is `DEFAULT_ACTIONS_URL` in `app.ini` for? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1055954954 - Why the api for runners is not under the normal `/api/v1` prefix? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1061173592 - Why DBFS? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1061301178 - Why ignore events triggered by `gitea-actions` bot? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1063254103 - Why there's no permission control for actions? - https://github.com/go-gitea/gitea/pull/21937#discussion_r1090229868 ### What it looks like <details> #### Manage runners <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205870657-c72f590e-2e08-4cd4-be7f-2e0abb299bbf.png"> #### List runs <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205872794-50fde990-2b45-48c1-a178-908e4ec5b627.png"> #### View logs <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205872501-9b7b9000-9542-4991-8f55-18ccdada77c3.png"> </details> ### How to try it <details> #### 1. Start Gitea Clone this branch and [install from source](https://docs.gitea.io/en-us/install-from-source). Add additional configurations in `app.ini` to enable Actions: ```ini [actions] ENABLED = true ``` Start it. If all is well, you'll see the management page of runners: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205877365-8e30a780-9b10-4154-b3e8-ee6c3cb35a59.png"> #### 2. Start runner Clone the [act_runner](https://gitea.com/gitea/act_runner), and follow the [README](https://gitea.com/gitea/act_runner/src/branch/main/README.md) to start it. If all is well, you'll see a new runner has been added: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205878000-216f5937-e696-470d-b66c-8473987d91c3.png"> #### 3. Enable actions for a repo Create a new repo or open an existing one, check the `Actions` checkbox in settings and submit. <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205879705-53e09208-73c0-4b3e-a123-2dcf9aba4b9c.png"> <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205879383-23f3d08f-1a85-41dd-a8b3-54e2ee6453e8.png"> If all is well, you'll see a new tab "Actions": <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205881648-a8072d8c-5803-4d76-b8a8-9b2fb49516c1.png"> #### 4. Upload workflow files Upload some workflow files to `.gitea/workflows/xxx.yaml`, you can follow the [quickstart](https://docs.github.com/en/actions/quickstart) of GitHub Actions. Yes, Gitea Actions is compatible with GitHub Actions in most cases, you can use the same demo: ```yaml name: GitHub Actions Demo run-name: ${{ github.actor }} is testing out GitHub Actions 🚀 on: [push] jobs: Explore-GitHub-Actions: runs-on: ubuntu-latest steps: - run: echo "🎉 The job was automatically triggered by a ${{ github.event_name }} event." - run: echo "🐧 This job is now running on a ${{ runner.os }} server hosted by GitHub!" - run: echo "🔎 The name of your branch is ${{ github.ref }} and your repository is ${{ github.repository }}." - name: Check out repository code uses: actions/checkout@v3 - run: echo "💡 The ${{ github.repository }} repository has been cloned to the runner." - run: echo "🖥️ The workflow is now ready to test your code on the runner." - name: List files in the repository run: | ls ${{ github.workspace }} - run: echo "🍏 This job's status is ${{ job.status }}." ``` If all is well, you'll see a new run in `Actions` tab: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205884473-79a874bc-171b-4aaf-acd5-0241a45c3b53.png"> #### 5. Check the logs of jobs Click a run and you'll see the logs: <img width="1792" alt="image" src="https://user-images.githubusercontent.com/9418365/205884800-994b0374-67f7-48ff-be9a-4c53f3141547.png"> #### 6. Go on You can try more examples in [the documents](https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions) of GitHub Actions, then you might find a lot of bugs. Come on, PRs are welcome. </details> See also: [Feature Preview: Gitea Actions](https://blog.gitea.io/2022/12/feature-preview-gitea-actions/) --------- Co-authored-by: a1012112796 <1012112796@qq.com> Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com> Co-authored-by: delvh <dev.lh@web.de> Co-authored-by: ChristopherHX <christopher.homberger@web.de> Co-authored-by: John Olheiser <john.olheiser@gmail.com>
2023-01-31 02:45:19 +01:00
ActionPerm: int(actionPerm),
}
scanner := bufio.NewScanner(os.Stdin)
oldCommitIDs := make([]string, hookBatchSize)
newCommitIDs := make([]string, hookBatchSize)
Use the type RefName for all the needed places and fix pull mirror sync bugs (#24634) This PR replaces all string refName as a type `git.RefName` to make the code more maintainable. Fix #15367 Replaces #23070 It also fixed a bug that tags are not sync because `git remote --prune origin` will not remove local tags if remote removed. We in fact should use `git fetch --prune --tags origin` but not `git remote update origin` to do the sync. Some answer from ChatGPT as ref. > If the git fetch --prune --tags command is not working as expected, there could be a few reasons why. Here are a few things to check: > >Make sure that you have the latest version of Git installed on your system. You can check the version by running git --version in your terminal. If you have an outdated version, try updating Git and see if that resolves the issue. > >Check that your Git repository is properly configured to track the remote repository's tags. You can check this by running git config --get-all remote.origin.fetch and verifying that it includes +refs/tags/*:refs/tags/*. If it does not, you can add it by running git config --add remote.origin.fetch "+refs/tags/*:refs/tags/*". > >Verify that the tags you are trying to prune actually exist on the remote repository. You can do this by running git ls-remote --tags origin to list all the tags on the remote repository. > >Check if any local tags have been created that match the names of tags on the remote repository. If so, these local tags may be preventing the git fetch --prune --tags command from working properly. You can delete local tags using the git tag -d command. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-05-26 03:04:48 +02:00
refFullNames := make([]git.RefName, hookBatchSize)
count := 0
total := 0
lastline := 0
var out io.Writer
out = &nilWriter{}
if setting.Git.VerbosePush {
if setting.Git.VerbosePushDelay > 0 {
dWriter := newDelayWriter(os.Stdout, setting.Git.VerbosePushDelay)
defer dWriter.Close()
out = dWriter
} else {
out = os.Stdout
}
}
supportProcReceive := false
if git.CheckGitVersionAtLeast("2.29") == nil {
supportProcReceive = true
}
for scanner.Scan() {
// TODO: support news feeds for wiki
if isWiki {
continue
}
fields := bytes.Fields(scanner.Bytes())
if len(fields) != 3 {
continue
}
oldCommitID := string(fields[0])
newCommitID := string(fields[1])
Use the type RefName for all the needed places and fix pull mirror sync bugs (#24634) This PR replaces all string refName as a type `git.RefName` to make the code more maintainable. Fix #15367 Replaces #23070 It also fixed a bug that tags are not sync because `git remote --prune origin` will not remove local tags if remote removed. We in fact should use `git fetch --prune --tags origin` but not `git remote update origin` to do the sync. Some answer from ChatGPT as ref. > If the git fetch --prune --tags command is not working as expected, there could be a few reasons why. Here are a few things to check: > >Make sure that you have the latest version of Git installed on your system. You can check the version by running git --version in your terminal. If you have an outdated version, try updating Git and see if that resolves the issue. > >Check that your Git repository is properly configured to track the remote repository's tags. You can check this by running git config --get-all remote.origin.fetch and verifying that it includes +refs/tags/*:refs/tags/*. If it does not, you can add it by running git config --add remote.origin.fetch "+refs/tags/*:refs/tags/*". > >Verify that the tags you are trying to prune actually exist on the remote repository. You can do this by running git ls-remote --tags origin to list all the tags on the remote repository. > >Check if any local tags have been created that match the names of tags on the remote repository. If so, these local tags may be preventing the git fetch --prune --tags command from working properly. You can delete local tags using the git tag -d command. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-05-26 03:04:48 +02:00
refFullName := git.RefName(fields[2])
total++
lastline++
// If the ref is a branch or tag, check if it's protected
// if supportProcReceive all ref should be checked because
// permission check was delayed
Use the type RefName for all the needed places and fix pull mirror sync bugs (#24634) This PR replaces all string refName as a type `git.RefName` to make the code more maintainable. Fix #15367 Replaces #23070 It also fixed a bug that tags are not sync because `git remote --prune origin` will not remove local tags if remote removed. We in fact should use `git fetch --prune --tags origin` but not `git remote update origin` to do the sync. Some answer from ChatGPT as ref. > If the git fetch --prune --tags command is not working as expected, there could be a few reasons why. Here are a few things to check: > >Make sure that you have the latest version of Git installed on your system. You can check the version by running git --version in your terminal. If you have an outdated version, try updating Git and see if that resolves the issue. > >Check that your Git repository is properly configured to track the remote repository's tags. You can check this by running git config --get-all remote.origin.fetch and verifying that it includes +refs/tags/*:refs/tags/*. If it does not, you can add it by running git config --add remote.origin.fetch "+refs/tags/*:refs/tags/*". > >Verify that the tags you are trying to prune actually exist on the remote repository. You can do this by running git ls-remote --tags origin to list all the tags on the remote repository. > >Check if any local tags have been created that match the names of tags on the remote repository. If so, these local tags may be preventing the git fetch --prune --tags command from working properly. You can delete local tags using the git tag -d command. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-05-26 03:04:48 +02:00
if supportProcReceive || refFullName.IsBranch() || refFullName.IsTag() {
oldCommitIDs[count] = oldCommitID
newCommitIDs[count] = newCommitID
refFullNames[count] = refFullName
count++
fmt.Fprintf(out, "*")
if count >= hookBatchSize {
fmt.Fprintf(out, " Checking %d references\n", count)
hookOptions.OldCommitIDs = oldCommitIDs
hookOptions.NewCommitIDs = newCommitIDs
hookOptions.RefFullNames = refFullNames
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
extra := private.HookPreReceive(ctx, username, reponame, hookOptions)
if extra.HasError() {
return fail(ctx, extra.UserMsg, "HookPreReceive(batch) failed: %v", extra.Error)
}
count = 0
lastline = 0
}
} else {
fmt.Fprintf(out, ".")
}
if lastline >= hookBatchSize {
fmt.Fprintf(out, "\n")
lastline = 0
}
}
if count > 0 {
hookOptions.OldCommitIDs = oldCommitIDs[:count]
hookOptions.NewCommitIDs = newCommitIDs[:count]
hookOptions.RefFullNames = refFullNames[:count]
fmt.Fprintf(out, " Checking %d references\n", count)
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
extra := private.HookPreReceive(ctx, username, reponame, hookOptions)
if extra.HasError() {
return fail(ctx, extra.UserMsg, "HookPreReceive(last) failed: %v", extra.Error)
}
} else if lastline > 0 {
fmt.Fprintf(out, "\n")
}
fmt.Fprintf(out, "Checked %d references in total\n", total)
return nil
}
func runHookUpdate(c *cli.Context) error {
// Update is empty and is kept only for backwards compatibility
return nil
}
func runHookPostReceive(c *cli.Context) error {
ctx, cancel := installSignals()
defer cancel()
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
setup(ctx, c.Bool("debug"))
// First of all run update-server-info no matter what
if _, _, err := git.NewCommand(ctx, "update-server-info").RunStdString(nil); err != nil {
return fmt.Errorf("Failed to call 'git update-server-info': %w", err)
}
// Now if we're an internal don't do anything else
if isInternal, _ := strconv.ParseBool(os.Getenv(repo_module.EnvIsInternal)); isInternal {
return nil
}
if len(os.Getenv("SSH_ORIGINAL_COMMAND")) == 0 {
if setting.OnlyAllowPushIfGiteaEnvironmentSet {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
return fail(ctx, `Rejecting changes as Gitea environment not set.
If you are pushing over SSH you must push with a key managed by
Gitea or set your environment appropriately.`, "")
}
return nil
}
var out io.Writer
var dWriter *delayWriter
out = &nilWriter{}
if setting.Git.VerbosePush {
if setting.Git.VerbosePushDelay > 0 {
dWriter = newDelayWriter(os.Stdout, setting.Git.VerbosePushDelay)
defer dWriter.Close()
out = dWriter
} else {
out = os.Stdout
}
}
// the environment is set by serv command
repoUser := os.Getenv(repo_module.EnvRepoUsername)
isWiki, _ := strconv.ParseBool(os.Getenv(repo_module.EnvRepoIsWiki))
repoName := os.Getenv(repo_module.EnvRepoName)
pusherID, _ := strconv.ParseInt(os.Getenv(repo_module.EnvPusherID), 10, 64)
pusherName := os.Getenv(repo_module.EnvPusherName)
hookOptions := private.HookOptions{
UserName: pusherName,
UserID: pusherID,
GitAlternativeObjectDirectories: os.Getenv(private.GitAlternativeObjectDirectories),
GitObjectDirectory: os.Getenv(private.GitObjectDirectory),
GitQuarantinePath: os.Getenv(private.GitQuarantinePath),
GitPushOptions: pushOptions(),
}
oldCommitIDs := make([]string, hookBatchSize)
newCommitIDs := make([]string, hookBatchSize)
Use the type RefName for all the needed places and fix pull mirror sync bugs (#24634) This PR replaces all string refName as a type `git.RefName` to make the code more maintainable. Fix #15367 Replaces #23070 It also fixed a bug that tags are not sync because `git remote --prune origin` will not remove local tags if remote removed. We in fact should use `git fetch --prune --tags origin` but not `git remote update origin` to do the sync. Some answer from ChatGPT as ref. > If the git fetch --prune --tags command is not working as expected, there could be a few reasons why. Here are a few things to check: > >Make sure that you have the latest version of Git installed on your system. You can check the version by running git --version in your terminal. If you have an outdated version, try updating Git and see if that resolves the issue. > >Check that your Git repository is properly configured to track the remote repository's tags. You can check this by running git config --get-all remote.origin.fetch and verifying that it includes +refs/tags/*:refs/tags/*. If it does not, you can add it by running git config --add remote.origin.fetch "+refs/tags/*:refs/tags/*". > >Verify that the tags you are trying to prune actually exist on the remote repository. You can do this by running git ls-remote --tags origin to list all the tags on the remote repository. > >Check if any local tags have been created that match the names of tags on the remote repository. If so, these local tags may be preventing the git fetch --prune --tags command from working properly. You can delete local tags using the git tag -d command. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-05-26 03:04:48 +02:00
refFullNames := make([]git.RefName, hookBatchSize)
count := 0
total := 0
wasEmpty := false
masterPushed := false
results := make([]private.HookPostReceiveBranchResult, 0)
scanner := bufio.NewScanner(os.Stdin)
for scanner.Scan() {
// TODO: support news feeds for wiki
if isWiki {
continue
}
fields := bytes.Fields(scanner.Bytes())
if len(fields) != 3 {
continue
}
fmt.Fprintf(out, ".")
oldCommitIDs[count] = string(fields[0])
newCommitIDs[count] = string(fields[1])
Use the type RefName for all the needed places and fix pull mirror sync bugs (#24634) This PR replaces all string refName as a type `git.RefName` to make the code more maintainable. Fix #15367 Replaces #23070 It also fixed a bug that tags are not sync because `git remote --prune origin` will not remove local tags if remote removed. We in fact should use `git fetch --prune --tags origin` but not `git remote update origin` to do the sync. Some answer from ChatGPT as ref. > If the git fetch --prune --tags command is not working as expected, there could be a few reasons why. Here are a few things to check: > >Make sure that you have the latest version of Git installed on your system. You can check the version by running git --version in your terminal. If you have an outdated version, try updating Git and see if that resolves the issue. > >Check that your Git repository is properly configured to track the remote repository's tags. You can check this by running git config --get-all remote.origin.fetch and verifying that it includes +refs/tags/*:refs/tags/*. If it does not, you can add it by running git config --add remote.origin.fetch "+refs/tags/*:refs/tags/*". > >Verify that the tags you are trying to prune actually exist on the remote repository. You can do this by running git ls-remote --tags origin to list all the tags on the remote repository. > >Check if any local tags have been created that match the names of tags on the remote repository. If so, these local tags may be preventing the git fetch --prune --tags command from working properly. You can delete local tags using the git tag -d command. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-05-26 03:04:48 +02:00
refFullNames[count] = git.RefName(fields[2])
if refFullNames[count] == git.BranchPrefix+"master" && newCommitIDs[count] != git.EmptySHA && count == total {
masterPushed = true
}
count++
total++
if count >= hookBatchSize {
fmt.Fprintf(out, " Processing %d references\n", count)
hookOptions.OldCommitIDs = oldCommitIDs
hookOptions.NewCommitIDs = newCommitIDs
hookOptions.RefFullNames = refFullNames
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
resp, extra := private.HookPostReceive(ctx, repoUser, repoName, hookOptions)
if extra.HasError() {
_ = dWriter.Close()
hookPrintResults(results)
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
return fail(ctx, extra.UserMsg, "HookPostReceive failed: %v", extra.Error)
}
wasEmpty = wasEmpty || resp.RepoWasEmpty
results = append(results, resp.Results...)
count = 0
}
}
if count == 0 {
if wasEmpty && masterPushed {
// We need to tell the repo to reset the default branch to master
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
extra := private.SetDefaultBranch(ctx, repoUser, repoName, "master")
if extra.HasError() {
return fail(ctx, extra.UserMsg, "SetDefaultBranch failed: %v", extra.Error)
}
}
fmt.Fprintf(out, "Processed %d references in total\n", total)
_ = dWriter.Close()
hookPrintResults(results)
return nil
}
hookOptions.OldCommitIDs = oldCommitIDs[:count]
hookOptions.NewCommitIDs = newCommitIDs[:count]
hookOptions.RefFullNames = refFullNames[:count]
fmt.Fprintf(out, " Processing %d references\n", count)
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
resp, extra := private.HookPostReceive(ctx, repoUser, repoName, hookOptions)
if resp == nil {
_ = dWriter.Close()
hookPrintResults(results)
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
return fail(ctx, extra.UserMsg, "HookPostReceive failed: %v", extra.Error)
}
wasEmpty = wasEmpty || resp.RepoWasEmpty
results = append(results, resp.Results...)
fmt.Fprintf(out, "Processed %d references in total\n", total)
if wasEmpty && masterPushed {
// We need to tell the repo to reset the default branch to master
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
extra := private.SetDefaultBranch(ctx, repoUser, repoName, "master")
if extra.HasError() {
return fail(ctx, extra.UserMsg, "SetDefaultBranch failed: %v", extra.Error)
}
}
_ = dWriter.Close()
hookPrintResults(results)
return nil
}
func hookPrintResults(results []private.HookPostReceiveBranchResult) {
for _, res := range results {
if !res.Message {
continue
}
fmt.Fprintln(os.Stderr, "")
if res.Create {
fmt.Fprintf(os.Stderr, "Create a new pull request for '%s':\n", res.Branch)
fmt.Fprintf(os.Stderr, " %s\n", res.URL)
} else {
fmt.Fprint(os.Stderr, "Visit the existing pull request:\n")
fmt.Fprintf(os.Stderr, " %s\n", res.URL)
}
fmt.Fprintln(os.Stderr, "")
os.Stderr.Sync()
}
}
func pushOptions() map[string]string {
opts := make(map[string]string)
if pushCount, err := strconv.Atoi(os.Getenv(private.GitPushOptionCount)); err == nil {
for idx := 0; idx < pushCount; idx++ {
opt := os.Getenv(fmt.Sprintf("GIT_PUSH_OPTION_%d", idx))
kv := strings.SplitN(opt, "=", 2)
if len(kv) == 2 {
opts[kv[0]] = kv[1]
}
}
}
return opts
}
func runHookProcReceive(c *cli.Context) error {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
ctx, cancel := installSignals()
defer cancel()
setup(ctx, c.Bool("debug"))
if len(os.Getenv("SSH_ORIGINAL_COMMAND")) == 0 {
if setting.OnlyAllowPushIfGiteaEnvironmentSet {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
return fail(ctx, `Rejecting changes as Gitea environment not set.
If you are pushing over SSH you must push with a key managed by
Gitea or set your environment appropriately.`, "")
}
return nil
}
if git.CheckGitVersionAtLeast("2.29") != nil {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
return fail(ctx, "No proc-receive support", "current git version doesn't support proc-receive.")
}
reader := bufio.NewReader(os.Stdin)
repoUser := os.Getenv(repo_module.EnvRepoUsername)
repoName := os.Getenv(repo_module.EnvRepoName)
pusherID, _ := strconv.ParseInt(os.Getenv(repo_module.EnvPusherID), 10, 64)
pusherName := os.Getenv(repo_module.EnvPusherName)
// 1. Version and features negotiation.
// S: PKT-LINE(version=1\0push-options atomic...) / PKT-LINE(version=1\n)
// S: flush-pkt
// H: PKT-LINE(version=1\0push-options...)
// H: flush-pkt
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
rs, err := readPktLine(ctx, reader, pktLineTypeData)
if err != nil {
return err
}
const VersionHead string = "version=1"
var (
hasPushOptions bool
response = []byte(VersionHead)
requestOptions []string
)
index := bytes.IndexByte(rs.Data, byte(0))
if index >= len(rs.Data) {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
return fail(ctx, "Protocol: format error", "pkt-line: format error "+fmt.Sprint(rs.Data))
}
if index < 0 {
if len(rs.Data) == 10 && rs.Data[9] == '\n' {
index = 9
} else {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
return fail(ctx, "Protocol: format error", "pkt-line: format error "+fmt.Sprint(rs.Data))
}
}
if string(rs.Data[0:index]) != VersionHead {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
return fail(ctx, "Protocol: version error", "Received unsupported version: %s", string(rs.Data[0:index]))
}
requestOptions = strings.Split(string(rs.Data[index+1:]), " ")
for _, option := range requestOptions {
if strings.HasPrefix(option, "push-options") {
response = append(response, byte(0))
response = append(response, []byte("push-options")...)
hasPushOptions = true
}
}
response = append(response, '\n')
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
_, err = readPktLine(ctx, reader, pktLineTypeFlush)
if err != nil {
return err
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
err = writeDataPktLine(ctx, os.Stdout, response)
if err != nil {
return err
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
err = writeFlushPktLine(ctx, os.Stdout)
if err != nil {
return err
}
// 2. receive commands from server.
// S: PKT-LINE(<old-oid> <new-oid> <ref>)
// S: ... ...
// S: flush-pkt
// # [receive push-options]
// S: PKT-LINE(push-option)
// S: ... ...
// S: flush-pkt
hookOptions := private.HookOptions{
UserName: pusherName,
UserID: pusherID,
}
hookOptions.OldCommitIDs = make([]string, 0, hookBatchSize)
hookOptions.NewCommitIDs = make([]string, 0, hookBatchSize)
Use the type RefName for all the needed places and fix pull mirror sync bugs (#24634) This PR replaces all string refName as a type `git.RefName` to make the code more maintainable. Fix #15367 Replaces #23070 It also fixed a bug that tags are not sync because `git remote --prune origin` will not remove local tags if remote removed. We in fact should use `git fetch --prune --tags origin` but not `git remote update origin` to do the sync. Some answer from ChatGPT as ref. > If the git fetch --prune --tags command is not working as expected, there could be a few reasons why. Here are a few things to check: > >Make sure that you have the latest version of Git installed on your system. You can check the version by running git --version in your terminal. If you have an outdated version, try updating Git and see if that resolves the issue. > >Check that your Git repository is properly configured to track the remote repository's tags. You can check this by running git config --get-all remote.origin.fetch and verifying that it includes +refs/tags/*:refs/tags/*. If it does not, you can add it by running git config --add remote.origin.fetch "+refs/tags/*:refs/tags/*". > >Verify that the tags you are trying to prune actually exist on the remote repository. You can do this by running git ls-remote --tags origin to list all the tags on the remote repository. > >Check if any local tags have been created that match the names of tags on the remote repository. If so, these local tags may be preventing the git fetch --prune --tags command from working properly. You can delete local tags using the git tag -d command. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-05-26 03:04:48 +02:00
hookOptions.RefFullNames = make([]git.RefName, 0, hookBatchSize)
for {
// note: pktLineTypeUnknow means pktLineTypeFlush and pktLineTypeData all allowed
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
rs, err = readPktLine(ctx, reader, pktLineTypeUnknow)
if err != nil {
return err
}
if rs.Type == pktLineTypeFlush {
break
}
t := strings.SplitN(string(rs.Data), " ", 3)
if len(t) != 3 {
continue
}
hookOptions.OldCommitIDs = append(hookOptions.OldCommitIDs, t[0])
hookOptions.NewCommitIDs = append(hookOptions.NewCommitIDs, t[1])
Use the type RefName for all the needed places and fix pull mirror sync bugs (#24634) This PR replaces all string refName as a type `git.RefName` to make the code more maintainable. Fix #15367 Replaces #23070 It also fixed a bug that tags are not sync because `git remote --prune origin` will not remove local tags if remote removed. We in fact should use `git fetch --prune --tags origin` but not `git remote update origin` to do the sync. Some answer from ChatGPT as ref. > If the git fetch --prune --tags command is not working as expected, there could be a few reasons why. Here are a few things to check: > >Make sure that you have the latest version of Git installed on your system. You can check the version by running git --version in your terminal. If you have an outdated version, try updating Git and see if that resolves the issue. > >Check that your Git repository is properly configured to track the remote repository's tags. You can check this by running git config --get-all remote.origin.fetch and verifying that it includes +refs/tags/*:refs/tags/*. If it does not, you can add it by running git config --add remote.origin.fetch "+refs/tags/*:refs/tags/*". > >Verify that the tags you are trying to prune actually exist on the remote repository. You can do this by running git ls-remote --tags origin to list all the tags on the remote repository. > >Check if any local tags have been created that match the names of tags on the remote repository. If so, these local tags may be preventing the git fetch --prune --tags command from working properly. You can delete local tags using the git tag -d command. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-05-26 03:04:48 +02:00
hookOptions.RefFullNames = append(hookOptions.RefFullNames, git.RefName(t[2]))
}
hookOptions.GitPushOptions = make(map[string]string)
if hasPushOptions {
for {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
rs, err = readPktLine(ctx, reader, pktLineTypeUnknow)
if err != nil {
return err
}
if rs.Type == pktLineTypeFlush {
break
}
kv := strings.SplitN(string(rs.Data), "=", 2)
if len(kv) == 2 {
hookOptions.GitPushOptions[kv[0]] = kv[1]
}
}
}
// 3. run hook
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
resp, extra := private.HookProcReceive(ctx, repoUser, repoName, hookOptions)
if extra.HasError() {
return fail(ctx, extra.UserMsg, "HookProcReceive failed: %v", extra.Error)
}
// 4. response result to service
// # a. OK, but has an alternate reference. The alternate reference name
// # and other status can be given in option directives.
// H: PKT-LINE(ok <ref>)
// H: PKT-LINE(option refname <refname>)
// H: PKT-LINE(option old-oid <old-oid>)
// H: PKT-LINE(option new-oid <new-oid>)
// H: PKT-LINE(option forced-update)
// H: ... ...
// H: flush-pkt
// # b. NO, I reject it.
// H: PKT-LINE(ng <ref> <reason>)
// # c. Fall through, let 'receive-pack' to execute it.
// H: PKT-LINE(ok <ref>)
// H: PKT-LINE(option fall-through)
for _, rs := range resp.Results {
if len(rs.Err) > 0 {
Use the type RefName for all the needed places and fix pull mirror sync bugs (#24634) This PR replaces all string refName as a type `git.RefName` to make the code more maintainable. Fix #15367 Replaces #23070 It also fixed a bug that tags are not sync because `git remote --prune origin` will not remove local tags if remote removed. We in fact should use `git fetch --prune --tags origin` but not `git remote update origin` to do the sync. Some answer from ChatGPT as ref. > If the git fetch --prune --tags command is not working as expected, there could be a few reasons why. Here are a few things to check: > >Make sure that you have the latest version of Git installed on your system. You can check the version by running git --version in your terminal. If you have an outdated version, try updating Git and see if that resolves the issue. > >Check that your Git repository is properly configured to track the remote repository's tags. You can check this by running git config --get-all remote.origin.fetch and verifying that it includes +refs/tags/*:refs/tags/*. If it does not, you can add it by running git config --add remote.origin.fetch "+refs/tags/*:refs/tags/*". > >Verify that the tags you are trying to prune actually exist on the remote repository. You can do this by running git ls-remote --tags origin to list all the tags on the remote repository. > >Check if any local tags have been created that match the names of tags on the remote repository. If so, these local tags may be preventing the git fetch --prune --tags command from working properly. You can delete local tags using the git tag -d command. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-05-26 03:04:48 +02:00
err = writeDataPktLine(ctx, os.Stdout, []byte("ng "+rs.OriginalRef.String()+" "+rs.Err))
if err != nil {
return err
}
continue
}
if rs.IsNotMatched {
Use the type RefName for all the needed places and fix pull mirror sync bugs (#24634) This PR replaces all string refName as a type `git.RefName` to make the code more maintainable. Fix #15367 Replaces #23070 It also fixed a bug that tags are not sync because `git remote --prune origin` will not remove local tags if remote removed. We in fact should use `git fetch --prune --tags origin` but not `git remote update origin` to do the sync. Some answer from ChatGPT as ref. > If the git fetch --prune --tags command is not working as expected, there could be a few reasons why. Here are a few things to check: > >Make sure that you have the latest version of Git installed on your system. You can check the version by running git --version in your terminal. If you have an outdated version, try updating Git and see if that resolves the issue. > >Check that your Git repository is properly configured to track the remote repository's tags. You can check this by running git config --get-all remote.origin.fetch and verifying that it includes +refs/tags/*:refs/tags/*. If it does not, you can add it by running git config --add remote.origin.fetch "+refs/tags/*:refs/tags/*". > >Verify that the tags you are trying to prune actually exist on the remote repository. You can do this by running git ls-remote --tags origin to list all the tags on the remote repository. > >Check if any local tags have been created that match the names of tags on the remote repository. If so, these local tags may be preventing the git fetch --prune --tags command from working properly. You can delete local tags using the git tag -d command. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-05-26 03:04:48 +02:00
err = writeDataPktLine(ctx, os.Stdout, []byte("ok "+rs.OriginalRef.String()))
if err != nil {
return err
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
err = writeDataPktLine(ctx, os.Stdout, []byte("option fall-through"))
if err != nil {
return err
}
continue
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
err = writeDataPktLine(ctx, os.Stdout, []byte("ok "+rs.OriginalRef))
if err != nil {
return err
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
err = writeDataPktLine(ctx, os.Stdout, []byte("option refname "+rs.Ref))
if err != nil {
return err
}
if rs.OldOID != git.EmptySHA {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
err = writeDataPktLine(ctx, os.Stdout, []byte("option old-oid "+rs.OldOID))
if err != nil {
return err
}
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
err = writeDataPktLine(ctx, os.Stdout, []byte("option new-oid "+rs.NewOID))
if err != nil {
return err
}
if rs.IsForcePush {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
err = writeDataPktLine(ctx, os.Stdout, []byte("option forced-update"))
if err != nil {
return err
}
}
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
err = writeFlushPktLine(ctx, os.Stdout)
return err
}
// git PKT-Line api
// pktLineType message type of pkt-line
type pktLineType int64
const (
// UnKnow type
pktLineTypeUnknow pktLineType = 0
// flush-pkt "0000"
pktLineTypeFlush pktLineType = iota
// data line
pktLineTypeData
)
// gitPktLine pkt-line api
type gitPktLine struct {
Type pktLineType
Length uint64
Data []byte
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
func readPktLine(ctx context.Context, in *bufio.Reader, requestType pktLineType) (*gitPktLine, error) {
var (
err error
r *gitPktLine
)
// read prefix
lengthBytes := make([]byte, 4)
for i := 0; i < 4; i++ {
lengthBytes[i], err = in.ReadByte()
if err != nil {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
return nil, fail(ctx, "Protocol: stdin error", "Pkt-Line: read stdin failed : %v", err)
}
}
r = new(gitPktLine)
r.Length, err = strconv.ParseUint(string(lengthBytes), 16, 32)
if err != nil {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
return nil, fail(ctx, "Protocol: format parse error", "Pkt-Line format is wrong :%v", err)
}
if r.Length == 0 {
if requestType == pktLineTypeData {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
return nil, fail(ctx, "Protocol: format data error", "Pkt-Line format is wrong")
}
r.Type = pktLineTypeFlush
return r, nil
}
if r.Length <= 4 || r.Length > 65520 || requestType == pktLineTypeFlush {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
return nil, fail(ctx, "Protocol: format length error", "Pkt-Line format is wrong")
}
r.Data = make([]byte, r.Length-4)
for i := range r.Data {
r.Data[i], err = in.ReadByte()
if err != nil {
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
return nil, fail(ctx, "Protocol: data error", "Pkt-Line: read stdin failed : %v", err)
}
}
r.Type = pktLineTypeData
return r, nil
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
func writeFlushPktLine(ctx context.Context, out io.Writer) error {
l, err := out.Write([]byte("0000"))
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
if err != nil || l != 4 {
return fail(ctx, "Protocol: write error", "Pkt-Line response failed: %v", err)
}
return nil
}
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
func writeDataPktLine(ctx context.Context, out io.Writer, data []byte) error {
hexchar := []byte("0123456789abcdef")
hex := func(n uint64) byte {
return hexchar[(n)&15]
}
length := uint64(len(data) + 4)
tmp := make([]byte, 4)
tmp[0] = hex(length >> 12)
tmp[1] = hex(length >> 8)
tmp[2] = hex(length >> 4)
tmp[3] = hex(length)
lr, err := out.Write(tmp)
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
if err != nil || lr != 4 {
return fail(ctx, "Protocol: write error", "Pkt-Line response failed: %v", err)
}
lr, err = out.Write(data)
Refactor internal API for git commands, use meaningful messages instead of "Internal Server Error" (#23687) # Why this PR comes At first, I'd like to help users like #23636 (there are a lot) The unclear "Internal Server Error" is quite anonying, scare users, frustrate contributors, nobody knows what happens. So, it's always good to provide meaningful messages to end users (of course, do not leak sensitive information). When I started working on the "response message to end users", I found that the related code has a lot of technical debt. A lot of copy&paste code, unclear fields and usages. So I think it's good to make everything clear. # Tech Backgrounds Gitea has many sub-commands, some are used by admins, some are used by SSH servers or Git Hooks. Many sub-commands use "internal API" to communicate with Gitea web server. Before, Gitea server always use `StatusCode + Json "err" field` to return messages. * The CLI sub-commands: they expect to show all error related messages to site admin * The Serv/Hook sub-commands (for git clients): they could only show safe messages to end users, the error log could only be recorded by "SSHLog" to Gitea web server. In the old design, it assumes that: * If the StatusCode is 500 (in some functions), then the "err" field is error log, shouldn't be exposed to git client. * If the StatusCode is 40x, then the "err" field could be exposed. And some functions always read the "err" no matter what the StatusCode is. The old code is not strict, and it's difficult to distinguish the messages clearly and then output them correctly. # This PR To help to remove duplicate code and make everything clear, this PR introduces `ResponseExtra` and `requestJSONResp`. * `ResponseExtra` is a struct which contains "extra" information of a internal API response, including StatusCode, UserMsg, Error * `requestJSONResp` is a generic function which can be used for all cases to help to simplify the calls. * Remove all `map["err"]`, always use `private.Response{Err}` to construct error messages. * User messages and error messages are separated clearly, the `fail` and `handleCliResponseExtra` will output correct messages. * Replace all `Internal Server Error` messages with meaningful (still safe) messages. This PR saves more than 300 lines, while makes the git client messages more clear. Many gitea-serv/git-hook related essential functions are covered by tests. --------- Co-authored-by: delvh <dev.lh@web.de>
2023-03-29 08:32:26 +02:00
if err != nil || int(length-4) != lr {
return fail(ctx, "Protocol: write error", "Pkt-Line response failed: %v", err)
}
return nil
}